@article { author = {Karimi, F. and Sotudeh-Gharebagh, R. and Zarghami, R. and Mostoufi, N.}, title = {The use of pressure fluctuations in the monitoring of fluidized bed hydrodynamic}, journal = {Farayandno}, volume = {7}, number = {38}, pages = {5-16}, year = {2012}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {Perusing the hydrodynamic changes of fluidized bed is important for online monitoring of the drying process. The hydrodynamic changes occur because of a variety of reasons such as change of air velocity and change in physical features of particles. So in this research, fluidized bed dryer was considered to evaluate the effect of shrinkage and increasing particle density on hydrodynamic changes due to moisture loss. Therefore, wet rice particles were dried in fluidized bed with 15cm internal diameter and bed pressure fluctuations during this period were recorded in appropriate frequency. Data survey in the time domain showed that bubble size becomes smaller and more numerous by reducing the particle size. Evaluating data in the frequency domain also confirmed this trend of hydrodynamic changes. Also with the help of wavelet analysis, part of the signal related precisely to the bed hydrodynamic was evaluated and it was found that   large bubbles energy is transferred into smaller bubbles and clusters by decreasing bed volume}, keywords = {Online monitoring,Hydrodynamic,Fluidized bed dryer,Pressure fluctuations}, title_fa = {بهره گیری از نوسانات فشار در رصد هیدرودینامیک بسترهای سیال}, abstract_fa = {پیچیدگی هیدرودینامیک بستر های سیال و فقدان روشی که به صورت برخط و همزمان بستر را رصد کند به عنوان مانعی بر کنترل بهتر این گونه بسترها مورد توجه بسیاری از محققین می‌باشد. به طور کلی هیدرودینامیک بسترهای سیال با نوسان در سرعت هوای ورودی و تغییر مشخصات فیزیکی ذرات تغییر می‌کند. با تغییر هیدرودینامیک پارمترهای فیزیکی قابل اندازه گیری مانند فشار مطلق بستر نیز تغییر می‌کند. از این رو نوسانات فشار بستر سیال به منظور تعیین روشی که به صورت لحظه ای تغییرات هیدرودینامیک بستر را نمایش دهد ، در یک خشک کن بستر سیال مورد ارزیابی قرار گرفته است. خشک کن های بستر سیال به دلیل افزایش دانسیته و چروکیدگی ذرات تغییرات هیدرودینامیکی زیادی در طول مدت خشک شدن به همراه خواهد داشت و از این رو نمونه خوبی برای مطالعه هیدرودینامیک محسوب می‌شود. بدین منظور ذرات مرطوب برنج در بستر سیالی با قطر داخلی cm15خشک شد و در طول این مدت نوسانات فشار بستر در فرکانس مناسب اکتساب شدند.  بررسی داده‌ها در حوزه زمان نشان داد که با کاهش حجم ذرات حباب‌ها کوچکتر و بر تعداد آن افزوده می‌شود. ارزیابی داده‌ها در حوزه فرکانس نیز این روند تغییر هیدرودینامیک را تائید نمود. همچنین به کمک آنالیز موجک بخشی از سیگنال که دقیقاً به هیدرودینامیک بستر مرتبط می‌شود تعیین و مشخص شد که با کاهش حجم بستر انرژی حباب‌های بزرگ به حباب‌های کوچکتر و خوشه‌ها انتقال می‌یابد}, keywords_fa = {هیدرودینامیک بستر سیال,رصد برخط,نوسانات فشار}, url = {https://www.farayandno.ir/article_11647.html}, eprint = {https://www.farayandno.ir/article_11647_a20f7897d175c701ca8eefa60382ca81.pdf} } @article { author = {Khorasanizade, Aliakbar and Motafakker, Hossein}, title = {Identifying and Prioritizing Effective Parameters on Storage and Distribution Oil Depots with Passive Defense Approach}, journal = {Farayandno}, volume = {7}, number = {38}, pages = {17-31}, year = {2012}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {Regarding the fact that about 86 active storage and distribution depots are utilized in the country's fuel distribution cycle as well as the importance of fuel in the human life, this study was undertaken with the aim of determining important parameters affecting prioritization of oil product depots as well as their ranks in order to decrease their vulnerabilities and extend depots service life. Thus, questionnaires containing 37 suggested criteria provided based on the opinions obtained from academic and practitioner experts. Then, the gathered information was analyzed using MS Excel 2007 and SPSS 15.0. Based on the results, “number of industrial, economic, aviation and social centers covered by the depot” and “probability  of foreign enemy’s  invasion to the depot during war period” were selected as the most important parameters based on One-Sample (Mean) Test and Friedman Test, respectively. Then, using the results, research hypotheses were obtained.}, keywords = {Oil Product Storage and Distribution Depots,Passive defense,Prioritization}, title_fa = {شناسایی و اولویت بندی پارامترهای مؤثر برانبارهای استراتژیک ذخیره و توزیع فرآورده های نفتی با رویکرد پدافند غیرعامل}, abstract_fa = {با توجه به گستره حوزه نفوذ سوخت و نقش استراتژیک آن در پایداری کشور و با عنایت به فعالیت 86 انبار در چرخه سوخت‌رسانی کشور، این مطالعه با هدف شناسایی پارامترهای مهم تأثیرگذار بر اولویت‌بندی انبارها و بدست آوردن اوزان آن‌ها تعریف شده است تا بر اساس آن بتوان با توجه به محدودیت منابع و در راستای افزایش استمرار خدمات‌رسانی انبارها، در خصوص هزینه نمودن برای کاهش آسیب‌پذیری آن‌ها بدرستی اقدام نمود. بدین منظور، پرسشنامه‌ای حاوی 37 پارامتر پیشنهادی تأثیرگذار بر اهمیت انبارها بر اساس نظرات دانشگاهیان و خبرگان پدافند غیرعامل تدوین شد. اطلاعات گردآوری شده بکمک روش‌های آماری با استفاده از نرم‌افزارهای Excel-2007 و SPSS-15 تحلیل گردید. بر اساس نتایج بدست آمده، مهم‌ترین پارامترهای تأثیرگذار بر اهمیت انبارها بر اساس آزمون‌ میانگین "تعداد مراکز صنعتی، اقتصادی، فرودگاهی و اجتماعی تحت پوشش انبار" و بر اساس آزمون رتبه بندی فریدمن "امکان تهاجم دشمن خارجی در زمان جنگ" مشخص گردید. همچنین بکمک نتایج بدست آمده، فرضیه‌های متعدد تحقیق تبیین گردید.}, keywords_fa = {انبارهای ذخیره و توزیع فرآورده های نفتی,اولویت بندی,پدافند غیر عامل}, url = {https://www.farayandno.ir/article_11671.html}, eprint = {https://www.farayandno.ir/article_11671_f5b5dff71394d4a858f28fdaab23d21f.pdf} } @article { author = {Esmailzadeh Sokeh, Esmail}, title = {Investigation and simulation of emulsion system’s pilot of heavy crude oil transferring in pipeline}, journal = {Farayandno}, volume = {7}, number = {38}, pages = {32-38}, year = {2012}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {There are several ways to transport heavy crude oil; one of these, is emulsion method. The goal of this study is tocomparethe effective factors in transferring heavy crude oil in pipeline with and without emulsion method. In this paper, a heavy crude oil samplewith about15 API degrees is used.  The HYSYS software is used to simulate the oil transmission and the results from these two conditions are compared. The results show that using emulsion method would cause the pressure to decrease about 6042.3 K Pa in pipeline. This pressure drop indicates that the emulsion method requires lower energy for crude oil transmission in pipeline. The difference of pump’s power for heavy crude oil transmission in pipeline by the two mentioned methods has been 132.49 KW.}, keywords = {Heavy crude oil,Transport,Pipeline,Pressure drop,Emulsion method}, title_fa = {بررسی و شبیه سازی پایلوت سیستم امولسیونی انتقال نفت خام سنگین در خطوط لوله}, abstract_fa = {جهت انتقال نفت خام سنگین روش های مختلفی وجود دارد، یکی از این روش ها، روش امولسیونی می باشد. در این مقاله از نمونه نفت خام سنگینی ، با API حدود 15 استفاده شده است و  هدف مورد بررسی مقایسه انتقال نفت خام سنگین در دو حالت انتقال نفت خام بدون استفاده از روش امولسیونی و انتقال نفت خام با استفاده از روش امولسیونی می باشد، که برای این منظور از نرم افزار HYSYS جهت شبیه سازی سیستم انتقال نفت استفاده شده است. ابتدا سیستم خط لوله را در نرم افزار HYSYS با نفت خام سنگین بدون استفاده از روش امولسیونی راه اندازی کرده و افت فشاری را که در خط لوله برای این حالت ایجاد می شود را با حالتی از نفت خام سنگین که از روش امولسیون استفاده شده را مورد مقایسه قرار داده و نتایج بدست آمده در هر دو حالت مورد مقایسه و بررسی قرار گرفته که در نهایت منجر به ایجاد اختلاف افت فشاری معادل با  Kpa3/6042 در طول مسیر خط لوله شده، که این اختلاف افت فشار نشان دهنده این است که به انرژی بسیار کمی جهت انتقال نفت سنگین با این روش نیاز است. همچنین برای توان پمپ مورد نیاز جهت به گردش در آوردن نفت خام سنگین، درون خط لوله، اختلافی معادل با Kw 49/162 در بین دو روش مشاهده می شود که باعث کاهش هزینه هایی از قبیل خرید پمپ، میزان برق مصرفی ، کارگر عملیاتی و غیره می شود.}, keywords_fa = {نفت سنگین,انتقال نفت سنگین,خط لوله,افت فشار,امولسیون}, url = {https://www.farayandno.ir/article_11694.html}, eprint = {https://www.farayandno.ir/article_11694_b2c1bb1d1d86108bd1737587a713215d.pdf} } @article { author = {Mosmeri, Hamid and Pirhadi, Masood and Davarnejad, Reza}, title = {A review on the micro reactors and their new control methods}, journal = {Farayandno}, volume = {7}, number = {38}, pages = {39-52}, year = {2012}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {A micro reactor or a micro structured reactor or a micro channel reactor is a device in which chemical reactions take place in a channel with typical lateral dimensions less than 1 mm. Process Intensification (PI) is currently one of the most significant methods in chemical engineering and process technology. There is some lack of the literature for the Process Intensification Systems (PIS) and the miniaturized systems which has created some problems for the researchers. In this article, PIS and micro reactors were identified and discussed. Furthermore, their potentials and defects were mentioned. Some published literature and patents were applied for this purpose. A complete reconsideration on these micro reactors and their control was achieved.}, keywords = {Micro reactor,Control,Miniaturized system,PI,PIS}, title_fa = {مروری برمیکروراکتورها و روش های جدید کنترل آن ها}, abstract_fa = {یک میکروراکتور یا راکتور میکروساختار یا راکتور میکروکانالی به دستگاهی گفته می شود که در آن واکنش های شیمیایی در مجراهایی با ابعاد زیر mm1 انجام می گیرد. تشدید فرایند(PI) یکی از متداول ترین روشها در مهندسی شیمی و تکنولوژی کنترل میکروراکتورها به طور خاص، است. از زمان معرفی سیستم های تشدید فرایند (PIS) و به خصوص سیستم های مینیاتوری تا به حال، کمبود منابع اطلاعاتی جامع در مورد این سیستم ها همواره محققین را دچار مشکل کرده است. در این مقاله با معرفی PIS از مبنا و گردآوری اطلاعات از منابع مختلف در زمینه میکروراکتورها و معرفی پتانسیل ها و معایب این نوع راکتورها  و معرفی پتنت های ثبت شده در این مورد و اشاره به مشکل های موجود در مورد کنترل میکروراکتورها ،یک باز بینی کامل در مورد میکروراکتورها و کنترل این سیستم ها انجام شده است}, keywords_fa = {میکروراکتور,کنترل,سیستم مینیاتوری,PI,PIS}, url = {https://www.farayandno.ir/article_11695.html}, eprint = {https://www.farayandno.ir/article_11695_01dd45305c1462f6dae6b7cf6d5de6ce.pdf} } @article { author = {Hosseini, Samaneh and Taghizadeh, Majid and Eliassi, Ali}, title = {Preparation, characterizing, and activity evaluation of ZSM-5 nano catalyst in dehydration of methanol to dimethyl ether}, journal = {Farayandno}, volume = {7}, number = {38}, pages = {53-58}, year = {2012}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {In this study, ZSM-5 nanozeolite was synthesized by hydrothermal method in a Si/Al molar ratio of 125 at a temperature of 170 °C, the aging time of 3 h and the crystallization time of 72 h. The prepared nanocatalyst was characterized by BET, XRD, NH3-TPD, and SEM techniques. The activity of this catalyst was evaluated in the dehydration of methanol to dimethyl ether in a fixed bed reactor at 300 oC, 1 atm and a feed flow rate of 0.55 ml/min of pure methanol. A conversion of about 80% and about 86% yield of DME of were achieved, respectively. The prepared nanocatalyst has a crystal size of 22 nm and a specific surface area of about 398 m2g−1.}, keywords = {ZSM-5 nanocatalyst,methanol dehydration,hydrothermal method, dimethyl ether}, title_fa = {ساخت، تعیین مشخصات و ارزیابی عملکرد نانوکاتالیست ZSM-5 در فرایند آبگیری متانول به دی متیل اتر}, abstract_fa = {در این     تحقیق نانو زئولیتZSM-5  در نسبت مولی  Si/Alبرابر 125 در دمای 170 درجه سانتیگراد در مدت زمان پیرسازی 3 ساعت و زمان کریستال سازی 72 ساعت به روش هیدروترمال ساخته شد. ساختار نانوکاتالیست ساخته شده به وسیله آنالیز های BET، NH3-TPD،  XRDو SEM مورد بررسی قرار گرفت. فعالیت این کاتالیست در فرایند آبگیری از متانول برای تولید دی متیل اتر در یک راکتور بستر ثابت تحت شرایط عملیاتی (دمای  oC300، فشار  atm1 و دبی خوراک  ml/min55/0 از متانول خالص) مورد ارزیابی قرار گرفته، که میزان تبدیلی در حدود 80% و بازده تولیدی در حدود 86% بدست آمد. نانوکاتالیست ساخته شده دارای مساحت سطحی m2g-1398 و اندازه کریستالی در حدود nm 22 می باشد.}, keywords_fa = {نانوکاتالیست ZSM-5,آبگیری متانول,دی متیل اتر,روش هیدروترمال}, url = {https://www.farayandno.ir/article_11696.html}, eprint = {https://www.farayandno.ir/article_11696_b02b496d3d01b88ed8c0d3533db96066.pdf} } @article { author = {Khalili, A.A and Nalbandi, A.}, title = {Using a mixture of tire powder and PP fiber for removing oil spills from sea water}, journal = {Farayandno}, volume = {7}, number = {38}, pages = {59-68}, year = {2012}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {Recycled polypropylene (PP) fiber and waste tire powder have been used to remove spilled oil. The ASTM F726-99 method has been used to evaluate oil absorbing capability of PP fiber and it has been found that the fiber has a large rapid oil absorption capacity. The oil adsorption capacity of the fiber was dramatically reduced after a limited number of uses because of its poor elasticity. Tire powder which absorbs less oil more slowly, is more elastic than PP fiber and is capable to be used up to 100 times for oil absorption without losing its oil absorption capability. In this research, PP fiber and tire powder were mixed together to develop a composite material. It was found that the composite is capable of recovering great amounts of oil comparing to the any of its components. This composite can be used repeatedly for at least 100 times. Hence, the material cost for recovering 1 ton of spilled oil is about US $ 0.03, making it very competitive in comparison to other industrial oil absorbents on the market.}, keywords = {Oil spill,Oil absorbent,Tire rubber,PP fiber}, title_fa = {استفاده از مخلوط پودر لاستیک مستعمل و الیاف دوریز پلی پروپیلن جهت حذف لکه های نفتی در دریا}, abstract_fa = {الیاف پلی پروپیلن بازیافتی و پودر لاستیک مستعمل جهت حذف آلودگی های نفتی بکار گرفته شدند. روش استانداردASTM F726-99  برای ارزیابی میزان جذب الیاف پلی پروپیلن مورد استفاده قرار گرفت و مشخص شد الیاف مذکور از سرعت و ظرفیت جذب نفت بالایی برخوردار می باشد. الیاف پلی پروپیلن بدلیل ضعف الاستیسیته، ظرفیت جذبش پس از چند بار مصرف شدیدا کاهش می یابد. پودر لاستیک مستعمل که نفت کمتری را به آهستگی جذب می کند، از الاستیسیته بیشتری نسبت به الیاف پلی پروپیلن برخوردار است و لذا قادر است بطور مکرر بیش از 100 بار مورد استفاده قرار گیرد، زیرا ظرفیت جذب نفت آن با تعداد دفعات مصرف کاهش نمی یابد. در این تحقیق الیاف پلی پروپیلن و پودر لاستیک مستعمل جهت تهیه ماده ای مرکب با هم مخلوط شدند و مشخص گردید که این ماده توانایی بازیابی مقدار نفت بیشتری نسبت به هر یک از اجزای تشکیل دهنده آن را دارد. ماده مرکب مذکور توانایی بکارگیری مکرر بیش از 100 بار را خواهد داشت. بدین ترتیب هزینه مواد لازم برای بازیابی یک تن نفت خام توسط ماده مرکب حدود 03/. دلار آمریکا بر آورد می گردد که از نظر اقتصادی نسبت به سایر جاذب های تجارتی موجود در بازار کاملا مقرون بصرفه می باشد.}, keywords_fa = {آلودگی نفتی,جاذب های نفتی,پودر لاستیک,الیاف پلی پروپیلن}, url = {https://www.farayandno.ir/article_11697.html}, eprint = {https://www.farayandno.ir/article_11697_b95f1c051fbeba8313f351bd0e246be8.pdf} } @article { author = {Rahimi, R. and Alborzi, A. and Soudmand, M.H. and Zivdar, M.}, title = {An Introduction to Dividing Wall Column and Its Effects on decreasing Energy Consumption of Distillation Processes}, journal = {Farayandno}, volume = {7}, number = {38}, pages = {69-79}, year = {2012}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {The distillation process remains as the most common method of separation in chemical process industry so that the energy use of this process accounts for an estimated 3% of world’s energy consumption. Different methods have been considered to reduce the energy consumption in distillation processes. As one of these methods, The Dividing-Wall Column (DWC) has been of great concern for multi-component mixtures distillation. The design of DWC is based on Thermally Coupled Distillation System (TCDS) which eliminates some of the operational equipments. That leads to reduction of 20-30% in capital costs and about 25% in operating costs. Thus Dividing-wall column (DWC) is one of the best examples of process intensification in distillation.This paper presents an introduction to DWC, including column configuration, design, simulation and some current industrial applications.}, keywords = {}, title_fa = {شناختی از برج های دیوار میانی و تاثیر آن بر کاهش انرژی مورد نیاز در فرایند های تقطیر}, abstract_fa = {فرایند تقطیر هم‌چنان رایج‌ترین روش جداسازی در فرایند‌های شیمیایی است که حدود 3% از کل انرژی مصرفی جهان را در بر می‌گیرد. از این رو روش های متعددی برای کاهش انرژی در فرایند های تقطیر مورد توجه صنعت بوده است که نهایتا به طراحی سیستم کوپل گرمایی[1] منجر شده است. یکی از انواع چنین سیستم ها، برج‌های دیوار میانی[2] نامگذاری شده است که برای جداسازی مخلوط‌های چند جزئی مورد استفاده قرار می گیرد. اساس طراحی برج‌های دیوار میانی بر مبنای سیستم‌های کوپل گرمایی بوده که با حذف برخی از تجهیزات عملیاتی ، سبب کاهش 20-30%  سرمایه اولیه و حدود 25% هزینه عملیاتی می‌گردد. بنابراین می توان استفاده از برج های دیوار میانی را به عنوان یکی از بهترین روش ها در بهبود سازی فرایند های شیمیایی دانست.این مقاله به معرفی برج‌های دیوار میانی، پیکربندی و انواع روش های طراحی و شبیه سازی این برج‌ها می‌پردازد و همچنین مثال‌هایی از چند کاربرد مهم آن در صنعت و مقایسه آن با دو برج معمولی را بیان می‌کند.                        1. Thermally Coupled 2. Dividing-Wall Columns}, keywords_fa = {تقطیر,کوپل گرمایی,برج دیوار میانی,انرژی,روش طراحی میانبر}, url = {https://www.farayandno.ir/article_11698.html}, eprint = {https://www.farayandno.ir/article_11698_1f19207fd019a4d92b18d01513ba662a.pdf} }