@article { author = {Hosseinpour, Morteza and Fatemi, Shohreh}, title = {Upgrading Heavy oil and Residua in Supercritical Water}, journal = {Farayandno}, volume = {14}, number = {65}, pages = {5-24}, year = {2019}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {There are manychallenges during utilization of heavy oil and residue due to low quality as well as substantial amount of heteroatoms existed there. Recently, considerable attention has been paid to develop catalytic and non-catalytic heavy oil upgrading in supercritical water (SCW) environment. The reason can be attributed to the substantial adaptation in the physicochemical properties of SCW, including solvation and transport properties, that makes SCW nice candidate for heavy oil treatment. High density and diffusivity of SCW lead to elimination of all mass transfer barriers from reactant diffusion on catalyst surface, while the accumulation of coke over catalyst is suppressed. This article gives a detailed aspects of heavy oil upgrading in SCW.}, keywords = {Supercritical Water,Heavy oil,Catalytic Upgrading,Non-Catalytic Cracking}, title_fa = {ارتقاء نفت سنگین و ته‌ماند حاصل از پالایش در محیط آب فوق‌بحرانی}, abstract_fa = {نفت سنگین و ته‌ماند حاصل از پالایش به‌دلیل کیفیت نامرغوب و ناخالصی‌های گوگردی‌– نیتروژنی و فلزی در هنگام مصرف یا استفاده در فرایندهای دیگر با چالش مواجه می‌شوند. اخیرا، تمایل برای توسعه روشی جدید در فرایند ارتقاء کاتالیستی-غیرکاتالیستی هیدروکربن‌های سنگین در محیط آب فوق بحرانی وجود دارد. دلیل این امر تغییرات اساسی در خواص فیزیکی-‌شیمیایی آب به‌عنوان حلال تحت آن شرایط می‌باشد، چراکه خواص انحلالی و انتقالی آب در شرایط فوق‌بحرانی دستخوش تغییر فراوانی می‌گردد.‌ هیدروکربن سنگین در این شرایط به‌راحتی در آب حل شده و مقاومت‌های انتقال جرم جهت نفوذ واکنشگر روی سطح کاتالیست حذف می‌شود. آب در شرایط فوق بحرانی دارای دانسیته و ضریب نفوذ بالایی بوده که انباشت کک تشکیل شده بر روی کاتالیست را نیز غیر‌ممکن می‌سازد. این مقاله مروری بر تحقیقات صورت گرفته در این زمینه می‌باشد.}, keywords_fa = {آب فوق بحرانی,نفت سنگین,ارتقاء کاتالیستی,ارتقاء غیر کاتالیستی}, url = {https://www.farayandno.ir/article_244363.html}, eprint = {https://www.farayandno.ir/article_244363_8431fd832aea3d44f95bacb7dd97c3d1.pdf} } @article { author = {adib, kourosh and Heidariyan, Hamed}, title = {Evaluation of Jet Fuel Production through Extraction of H2 and CO2 in the Sea}, journal = {Farayandno}, volume = {14}, number = {65}, pages = {25-42}, year = {2019}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {Today, fuel is produced from non-renewable and limited sources, and since it is not possible to recover or produce these sources, replacing sources such as seawater can eliminate this problem for years. In recent years, jet fuel production from carbon dioxide (CO2) and hydrogen (H2) in seawater has been considered. Fuel production involves two stages of separation of hydrogen and carbon dioxide from water, as well as the synthesis of Fischer-Tropsch (FT) to produce jet fuel. In this research, different methods of hydrogen and carbon dioxide production from seawater have been introduced and their strengths and weaknesses are discussed. It has also been evaluated by examining the Fischer-Tropsch reaction, and the overall costs of the fuel production process in the oceans and seas. The results show that it takes 3 to 6 dollar to produce a gallon of fuel this way.}, keywords = {jet fuel,Carbon dioxide,Hydrogen,Fischer-Tropsch,Sea water}, title_fa = {بررسی روش‌های مختلف تولید سوخت جت از طریق استخراج هیدروژن و دی‌اکسیدکربن موجود در دریا}, abstract_fa = {امروزه سوخت از منابع تجدیدناپذیر و محدود تولید می‌شود و از آنجایی‌که امکان بازیابی ‌‌یا تولید این منابع وجود ندارد، جایگزینی منابعی همچون آب دریا می‌تواند این مشکل را تا سال‌ها از میان ببرد. در سال‌های اخیر تولید سوخت جت از دی‌اکسیدکربن (CO2) و هیدروژن (H2) موجود در آب دریا، مورد توجه قرار گرفته است. تولید سوخت از این طریق شامل دو مرحله جداسازی هیدروژن و دی‌اکسیدکربن از آب و همچنین سنتز ‌‌فیشر-تروپش برای تولید سوخت جت می‌باشد. در این تحقیق، روش‌های مختلف تولید هیدروژن و دی‌اکسیدکربن از آب دریا معرفی شده و ضعف و قوت هر ‌‌یک مورد بحث قرار گرفته‌ است. همچنین با بررسی واکنش ‌‌فیشر-تروپش و هزینه‌های کلی فرآیند، تولید سوخت در محیط اقیانوس‌ها و دریاها مورد ارزیابی قرار گرفته است. نتایج نشان می‌دهد که برای تولید یک گالن سوخت از این طریق 3 تا 6 دلار احتیاج است.}, keywords_fa = {سوخت جت,دی‌اکسیدکربن,هیدروژن,‌‌فیشر-تروپش,آب دریا}, url = {https://www.farayandno.ir/article_243993.html}, eprint = {https://www.farayandno.ir/article_243993_23af29e12373049526b4910f64e231c7.pdf} } @article { author = {Karami, Hamid and Kazemeini, Mohammad and Soltanali, Saeed and Rashidzadeh, Mehdi}, title = {Evaluation of the impact of zeolites on the performance of Diesel Hydrodesulfurization catalysts}, journal = {Farayandno}, volume = {14}, number = {65}, pages = {43-60}, year = {2019}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {The removal of sulfur-containing compounds (SCCs) from oil cuts, in particular diesel, is considered a global environmental issue due to the negative impacts of combustion products of diesel fuel on human health. Among the various desulfurization methods, Hydrodesulfurization is known as an effective method for the complete removal of SCCs from diesel fuel. Nonetheless, there has been a great interest in the development of a new generation of highly efficient HDS catalysts to respond to stricter environmental regulations and prevent poisoning of expensive catalysts used in other units. In the meantime, zeolite catalysts are of considerable importance in chemical reactions occurring in chemical, petrochemical, and oil refining industries. This paper reviews recent advances and achievements on catalysts mixed with zeolites in the HDS process due to its high capacity in the removal of highly stable SCCs such as 4, 6 dimethyldibenzothiophene and improvement of the performance of HDS catalysts.}, keywords = {Hydrodesulfurization,Zeolite,Support Catalyst}, title_fa = {بررسی تأثیر زئولیت‌ها در عملکرد کاتالیست‌های فرآیند گوگردزدایی هیدروژنی گازوئیل}, abstract_fa = {حذف ترکیبات گوگردی از برش‌های نفتی به­ویژه گازوئیل به دلیل اثرات منفی ناشی از احتراق که بر سلامت انسان و اتمسفر می‌گذارد؛ به‌عنوان یک مشکل زیست‌محیطی جهانی مطرح می­شود. گوگردزدایی هیدروژنی یکی از روش‌های مؤثر برای حذف کامل ترکیبات حاوی گوگرد از سوخت‌های حمل‌ونقل است. بااین‌حال، برای پاسخگویی به مقررات زیست‌محیطی سخت‌گیرانه‌تر و جلوگیری از مسمومیت کاتالیست­های گران‌قیمت دیگر واحدها، توسعه یک نسل جدید از کاتالیزورهای HDS بسیار کارآمد، موردتوجه بوده است. در این میان کاتالیست­های زئولیتی از اهمیت برجسته‌ای در واکنش‌های شیمیایی مرتبط با صنایع شیمیایی، پتروشیمی و صنایع پالایشی نفت برخوردار می‌باشد. در این مقاله، خلاصه‌ای از پیشرفت‌ها و دستاوردهای اخیر در مورد پایه کاتالیست‌های آمیخته‌شده با زئولیت در فرآیند HDS که ناشی از ظرفیت بالا در حذف ترکیبات گوگردی مقاوم مانند: 4,6 DMDBTو بهبود عملکرد کاتالیست­های فرآیند HDS بیان می­شود.}, keywords_fa = {گوگردزدایی هیدروژنی,زئولیت,پایه کاتالیستی}, url = {https://www.farayandno.ir/article_243994.html}, eprint = {https://www.farayandno.ir/article_243994_fbdf9765a8b464c705a37681c7f859cf.pdf} } @article { author = {Saeedi Majd, Ahmad and Amir Abbas, Izadpanah}, title = {Simulation of hydrogen sulfide absorption tower using caustic solution and replacement of different packings to reduce caustic consumption}, journal = {Farayandno}, volume = {14}, number = {65}, pages = {61-73}, year = {2019}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {In this study, the selective adsorption is considered by chemical absorption by caustic aqueous solution. This study is based on the simulation with the Aspen-Plus version 9. The rate-based model has been used to determine the separation efficiency for different operating conditions in the simulation. The NRTL electrolytic model is used to describe the non-ideal behavior in liquid phase, while the Soave-Redlich-Kwong equation of state is used for vapor phase. Simulation results show the high efficiency of caustic for the removal of hydrogen sulfide. The results show that the concentration of hydrogen sulfide in the outlet gas from the absorption tower is below 0.5 ppm. It is also discussed about the replacement of different packings and their effect on the reduction of caustic consumption. The results showed that at constant caustic flow rate and concentration, FLEXIMAX-metal 400 packing had better performance in absorbing hydrogen sulfide.}, keywords = {Selective reactive absorption,Hydrogen Sulfide,Caustic,Packed tower,Packing}, title_fa = {شبیه‌سازی ستون جذب سولفید هیدروژن با استفاده از محلول کاستیک و جایگزینی پرکن‌های مختلف جهت کاهش مصرف کاستیک}, abstract_fa = {در این مطالعه جذب واکنشی انتخابی به وسیله جذب شیمیایی در محلول آبی کاستیک در نظر گرفته شده است. این مطالعه بر پایه شبیه‌سازی با اسپن پلاس نسخه 9 می‌باشد. برای تعیین بازدهی جداسازی برای شرایط عملیاتی متفاوت در شبیه‌سازی، از مدل مبتنی بر نرخ استفاده شده است. مدل NRTL الکترولیتی برای توصیف رفتار غیر ایده‌آل در فاز مایع استفاده شده است، در حالی که معادله حالت سواو ردلیش-کوانگ برای فاز بخار استفاده شده است. نتایج شبیه‌سازی کارایی بالای کاستیک برای حذف سولفید هیدروژن را نشان می‌دهد. نتایج شبیه‌سازی نشان می‌دهد غلظت سولفید هیدروژن در گاز خروجی از برج جذب زیر  ppm0/5 می‌باشد. همچنین در مورد جایگزینی پرکن­های مختلف و اثر آ‌‌ن‌ها روی کاهش مصرف کاستیک بحث شده است. نتایج نشان داد که در یک دبی، غلظت و دمای ثابت جریان کاستیک، پرکن فلکسیمکس فلزی 400 عملکرد بهتر و صرفه اقتصادی مناسب‌تری در جذب سولفید هیدروژن نسبت به سایر پرکن­های مورد مقایسه دارد.}, keywords_fa = {جذب واکنشی انتخابی,سولفید هیدروژن,کاستیک,برج پرشده,پرکن}, url = {https://www.farayandno.ir/article_243996.html}, eprint = {https://www.farayandno.ir/article_243996_7622f7ac93e8d38c50a33b89a01e34f6.pdf} } @article { author = {Miroliaei, Alireza and Sadegh, Kobra}, title = {Numerical Simulation of Effect of Size and Shape of Al2O3 Nanoparticles in a Double Tube Heat Exchanger}, journal = {Farayandno}, volume = {14}, number = {65}, pages = {74-92}, year = {2019}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {In this study, the effects of shape and size of Al2O3suspended nanoparticles in water-based fluid with 2%volume fraction at 25 °C are numerically investigated on the performance of double tube heat exchanger in the laminar and turbulent flow regimes. The nanoparticle’s diameter was considered between 10 and 100 nm. The nanoparticles with shapes of spherical, cylindrical, and combination of spherical-cylindrical with percentages of 30, 50, 60, 70, 80, 90 of cylindrical nanoparticles were studied. The effect of shape of nanoparticles showed that heat transfer rate increases in the heat exchanger by increasing the percentage of cylindrical nanoparticles and cylindrical nanoparticles offer better heat transfer characteristics and heat transfer rate in the turbulent flow regime as its Nusselt number is15.4% more than the spherical nanoparticles. It was also seen that this suspension has the maximum pressure drop in the heat exchanger. The results of size of alumina nanoparticles with diameters of 10, 50 and 100 nm showed that the nanoparticles with smaller diameter have the largest increase in Nusselt number as well as pressure drop.}, keywords = {Combination of nanoparticles,Nanoparticle’s shape,Nanoparticle’s diameter,Double tube heat exchanger,nanofluid}, title_fa = {شبیه‌سازی عددی اثر اندازه و شکل نانوذرات Al2O3 در یک مبدل حرارتی دولوله‌ای}, abstract_fa = {در این پژوهش اثرات اندازه و شکل نانو ذرات  Al2O3معلق در سیال پایه‌ آب با کسر‌حجمی 2 درصد در دمای 25 درجه سانتیگراد روی عملکرد مبدل حرارتی دولوله‌ای به ‌صورت عددی در دو رژیم جریان آرام و آشفته مورد ‌بررسی قرار می گیرد. قطر نانو ذرات بین10 تا 100 نانومتر می‌باشد. نانو ذرات با اشکال کروی، استوانه‌ای و ترکیبی از نانو ذرات کروی-استوانه‌ای با درصدهای30، 50، 60، 70، 80، 90 از نانو ذرات استوانه‌ای مورد ‌مطالعه قرار گرفتند. اثر شکل نانو ذرات نشان داد با افزایش درصد نانو ذرات استوانه‌ای، میزان انتقال حرارت در مبدل حرارتی افزایش می یابد و نانو ذرات استوانه‌ای در رژیم جریان آشفته عملکرد بهتری در داخل مبدل حرارتی دارند بطوریکه عدد ناسلت آن 15/4 درصد بیش‌تر از نانو سیالات حاوی نانو ذرات کروی می‌باشد. هم‌چنین مشاهده شد این سوسپانسیون بیش‌ترین میزان افت فشار را در داخل مبدل حرارتی دارد. نتایج اندازه نانو ذرات آلومینا با قطرهای 10، 50 و 100 نانومتر نشان داد که نانو ذرات با قطر کوچک‌تر بیش‎ترین افزایش عدد ناسلت و افت فشار را دارند.}, keywords_fa = {ترکیب نانوذرات,شکل نانو ذره,قطر نانو ذره,مبدل حرارتی دولوله‌ای,نانوسیال}, url = {https://www.farayandno.ir/article_244395.html}, eprint = {https://www.farayandno.ir/article_244395_ee2ef6afc416542d755b4fa19a1e3be3.pdf} } @article { author = {hormozi, faramarz and sarbazi, zahra}, title = {Comparison of single-phase and two-phase models on Hydrodynamic and thermal performance prediction of nanofluid}, journal = {Farayandno}, volume = {14}, number = {65}, pages = {93-124}, year = {2019}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {In this paper, single and two-phase CFD models are introduced for predicting the thermo-hydraulic behavior of nanofluids. In single-phase models, behavior of nanofluid is similar to that of observed in conventional fluids and interactions between particles and base fluid are negligible. In two-phase models, interactions between nanoparticles and base fluid is taken into consideration. Both models showed the identical prediction for the heat transfer behavior, however, the temperature distribution of nanofluid was different, since in two-phase model, the parameters affecting the heat transfer are considered in the model. At low concentrations of nanofluid, it is a logical assumption to ignore the influence of dispersed phase (nanoparticle) on the flow field (continuous phase). Thus, the single phase is suitable for low-concentration nanofluids, while two-phase model is appropriate for nanofluids with high concentrations. Overall, one can use single or two-phase models depending on the type of problem, available computational facilities and accuracy.}, keywords = {Nanofluids,Computational fluid dynamics,Single-Phase Model,two-phase model,Heat Transfer}, title_fa = {مقایسه مدل‌های تک فاز و دوفاز در پیش بینی عملکرد هیدرودینامیکی و گرمایی نانوسیال}, abstract_fa = {در این مقاله مدل‌های تک فازی و دوفازی، برای پیش­بینی عملکرد هیدرودینامیکی و گرمایی نانوسیال معرفی می­شود. نانوسیال به عنوان محیط جدید انتقال حرارت، از پراکندن­ نانوذرات در ساخته می­شود. در مدل­های تک فازی فرض می­شود نانوسیال مانند سیال مجازی همگن رفتار می­کند. در مدل‌های دوفازی اندرکنش‌های بین ذرات و سیال نیز در نظر گرفته می‌شوند. هر دو نوع مدل در هیدرودینامیک پیش بینی یکسانی دارند، اما در توزیع دما تفاوت دارند. زیرا عوامل موثر انتقال حرارت در مدل­های دوفازی لحاظ می­شود. در غلظت کم نانو ذرات، می‌توان از اثرات ذرات فاز پراکنده بر میدان جریان فاز پیوسته صرف نظر و از مدل تک فازی استفاده کرد. در غلظت زیاد، برهم‌کنش میان ذرات و سیال مهم شده لازم است مدل‌های دوفازی به کار گرفته ‌شوند. با توجه به نوع مساله، امکانات موجود و دقت مورد نیاز، می توان از مدل­های تک فاز و یا دو فاز استفاده کرد.}, keywords_fa = {نانوسیال,دینامیک سیالات محاسباتی,مدل تک فازی,مدل دو فازی,انتقال گرما}, url = {https://www.farayandno.ir/article_244396.html}, eprint = {https://www.farayandno.ir/article_244396_8010292c0e02631519db7d36f919011d.pdf} } @article { author = {SeyedNaghvi, Mir Ali and Cheraghi, Nazanin}, title = {Analyzing the effect of talent management on human resource Succession planning}, journal = {Farayandno}, volume = {14}, number = {65}, pages = {125-141}, year = {2019}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {Talent management is a complete set of processes for identifying, developing, maintaining, and using talent employees in order to successfully perform the required activities of organization. Talent management assures the organization that the qualified people with the suitable skills stand at the proper job position in order to achieve the expected goals. The purpose of this study is to evaluate the effects of talent management on succession planning of human in Shiraz Petroleum Products Distribution Company. This study is a descriptive-practical research and the sample of this study includes 140 employees of Shiraz Petroleum Products Distribution Company. Total number of samples is suitable for this study. Data collection tool is questionnaire. According to the results of statistical tests, all research hypotheses are confirmed. The main hypothesis test result suggests that talent management on succession planning of talent human resources has positive and direct (statistically significant) effect. The findings subscribe to the effects of selection of talent employees on succession planning, participation of talent employees on succession planning, and instruction of talent employees on succession planning.}, keywords = {Talent management,talent employees,talent retention,succession planning,Successor Selection}, title_fa = {بررسی تاثیر مدیریت استعداد بر جانشین‌پروری نیروی انسانی در شرکت ملی پخش فراورده‌های نفتی منطقه فارس ناحیه مرکزی شیراز}, abstract_fa = {مدیریت استعداد فرایندی است که از زمان پدیدار شدن کماکان مسیر تحول را می‌پیماید، با آگاه شدن مدیران سازمان از این حقیقت که استعدادها و توانائی‌‎های کارکنان آنان است که کسب و کار آنها را به سمت موفقیت هدایت می‌کند، شرکت‌ها و سازمان‌ها بر آن شدند تا در زمینه­‌های مدیریت استعداد وارد عمل شوند و برای حفظ کارکنان با پتانسیل بالای خود تلاش نمایند. هدف از اجرای این تحقیق بررسی اثر مدیریت استعداد بر جانشین­پروری نیروی انسانی در شرکت پخش فرآورده­‌های نفتی منطقه فارس ناحیه مرکزی شیراز است. در این پژوهش، که یک پژوهش توصیفی-کاربردی است، جامعه آماری 140 نفر و شامل کارکنان شرکت ملی پخش فرآورده­‌های نفتی منطقه فارس ناحیه مرکزی شیراز است. نمونه آماری مناسب برای پژوهش تمام شمار است، جهت تجزیه و تحلیل داده­‌ها از نرم‌افزار 22 spss استفاده شده است. نتیجه آزمون فرضیه‎‌های اصلی حاکی از آن است که مدیریت استعداد بر جانشین‌پروری نیروی انسانی مستعد اثر مثبت و مستقیم (معنی‌دار) دارد. یافته­‌های پژوهش بر وجود اثرات انتخاب کارکنان مستعد بر جانشین­پروری، آموزش کارکنان مستعد بر جانشین­پروری و حفظ و نگهداشت کارکنان مستعد بر جانشین­پروری صحه می‌گذارد. }, keywords_fa = {مدیریت استعداد,کارکنان مستعد,خزانه استعداد‌ها,جانشین‌پروری,انتخاب جانشین}, url = {https://www.farayandno.ir/article_243995.html}, eprint = {https://www.farayandno.ir/article_243995_49aacb67b233e9f021cd0d7e7d37c976.pdf} }