@article { author = {nouri delavar, akram and صبوری, محسن and پاشا, امیر and جوانمردی, مهدی}, title = {Failure analysis of an economizer tube in a steam generation systems}, journal = {Farayandno}, volume = {9}, number = {48}, pages = {53-65}, year = {2015}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {Corrosion in steam generation systems may lead to many problems in industrial units. The economizer and heating systems are the first parts in which corrosion happens. Due to use of boiler exhaust gases, an economizer is a key factor in increasing boiler thermal efficiency. Generally, corrosion in economizer equipment is due to O2, CO2 and NH3. In this work, the failure of a finned tube economizer is investigated by chemical analysis of the fin and tube samples, XRD and XRF analysis of corrosion product and the relation between the corrosion morphology and sediment composition. In addition, effect of tube thinning due to corrosion on mechanical strength is evaluated under operational conditions. The obtained results clearly showed that oxygen was the main cause of corrosion. Additionally, mechanical strength and resistance of the tube to internal pressure are higher than the minimum limit value despite tube thinning by corrosion.}, keywords = {Steam generation systems,Economizer,Corrosion,Mechanical Strength}, title_fa = {تجزیه و تحلیل علل تخریب تیوب در اکونومایزر سیستم تولید بخار}, abstract_fa = {خوردگی در سیستم‌های تولید بخار باعث مشکلات زیادی در واحدهای صنعتی می‌شود. اکونومایزر و گرم‌کننده آب تغذیه اولین مناطق‌ متأثر از خوردگی است. اکونومایزر به دلیل مصرف انرژی گاز خروجی از سیستم بویلر، عاملی کلیدی در افزایش بهره‌وری حرارتی بویلر است. خوردگی باعث کاهش بهره‌وری بویلر می‌شود. عموماً خوردگی در بویلر توسط اکسیژن، دی‌اکسیدکربن و آمونیاک رخ می‌دهد. در این تحقیق دلایل خوردگی یک نمونه تیوب فین‌دار اکونومایزر با آنالیز شیمیایی تیوب و فین‌های آن، آنالیز شیمیایی محصولات خوردگی با روش‌های XRD و XRF و ارتباط بین مورفولوژی خوردگی و نتایج آنالیز بررسی شد. همچنین، اثر کاهش ضخامت تیوب بر استحکام مکانیکی در شرایط عملیاتی مطالعه شد. طبق نتایج، اکسیژن عامل اصلی خوردگی است. همچنین علیرغم کاهش ضخامت تیوب در اثر خوردگی، تیوب دارای استحکام مکانیکی کافی در برابر فشارهای داخلی است.}, keywords_fa = {سیستم‌های تولید بخار,اکونومایزر,خوردگی,استحکام مکانیکی}, url = {https://www.farayandno.ir/article_12389.html}, eprint = {https://www.farayandno.ir/article_12389_d20062f196ed1d3bfaf4d2608ffbe792.pdf} }