@article { author = {Ameri, Abolhasan}, title = {Determination of Safe Erosion Conditions in the Elbows of a Desalination Unit of a Refinery}, journal = {Farayandno}, volume = {16}, number = {75}, pages = {25-40}, year = {2021}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {10.22034/farayandno.2021.250990}, abstract = {Erosion occurs due to the transportation of very fine particles in fluid flow such as oil and gas pipelines, which could lead to serious damage to them. In this study, erosion phenomena is modeled using the COMSOL software. Three applied industrial models, namely Finnie, DNV and ECRC in turbulent fluid flow have been applied. The effects of fluid velocity including 5, 10 and 20 m/s, solid particles diameter including 120, 170 and 220 microns, and injecting sand flow rates including 0.3, 0.6 and 0.9 kg/h on the amount of erosion have been investigated. The three models show almost the same area in the external radius section of the elbow, as the region of most susceptible to erosion. The results show that increasing the fluid velocity, solid particles diameter and injection flow rate of solid particle boosts the erosion at the elbows.}, keywords = {erosion,Elbow,Fluid Velocity,Solid Particles Diameter,Injection Flow Rate}, title_fa = {تعیین شرایط ایمن سایشی در زانویی‌های واحد نمک‌زدایی واحد پالایشگاهی}, abstract_fa = {سایش در اثر انتقال ذرات ریز در جریان سیال مانند خطوط انتقال نفت و گاز اتفاق می‌افتد که می‌تواند منجر به آسیب­های جدی به آن­ها گردد. در این مطالعه، پدیده سایش با استفاده از نرم‌افزار کامسول مدل‌سازی شده است. از سه مدل پرکاربرد صنعتی با نام­های فینی، دی ان وی و ای سی آر سی، در جریان آشفته سیال استفاده شده است. اثر پارامترهای سرعت سیال شامل مقادیر 5، 10 و  20m/s، قطر ذرات جامد شامل مقادیر 120، 170 و 220 میکرون و دبی شن تزریقی شامل مقادیر 0/3، 0/6 و  0/9kg/h بر روی میزان سایش در زانویی مورد بررسی قرار گرفته است. در هر سه مدل ناحیه‌ای در بخش شعاع خارجی زانویی به‌عنوان ناحیه مستعد بیش‌ترین میزان خوردگی نشان می‌دهند. نتایج نشان می‌دهند که با افزایش سرعت سیال، قطر ذرات جامد و همچنین دبی تزریق ذرات جامد، میزان سایش در زانویی افزایش می‌یابد.}, keywords_fa = {سایش,زانویی,سرعت سیال,قطر ذرات جامد,دبی تزریقی}, url = {https://www.farayandno.ir/article_250990.html}, eprint = {https://www.farayandno.ir/article_250990_439014472f5f710bb016695160fc75af.pdf} }