@article { author = {Ahmadi, Yaser}, title = {Investigating rock and fluid parameters in choosing the most appropriate nanocomposites concentration in sandstone reservoirs}, journal = {Farayandno}, volume = {17}, number = {79}, pages = {15-24}, year = {2022}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {10.22034/farayandno.2023.1982800.1899}, abstract = {This study investigates the effect of new nanocomposites (ZnO/SiO2/Xanthan) for the most appropriate selection of nanocomposites concentration in sandstone porous media. This study has been done for the first time in sandstone reservoir. First, the morphology of nanocomposites was investigated using XRD, SEM tests. Then, the effect of nanocomposite on changes in wettability, surface tension, viscosity, zeta potential, pH, and density in different concentrations of nanocomposite in tank conditions was investigated. Based on the results of this study this study, the optimal concentration was selected for fluid dynamic tests. The optimum choice of fluid can reduce many problems, such as reducing oil recovery due to blocking the pores and throat of rocks. According to lowest contact angle (36°), highest zeta potential (-49.68 mV) in the presence of nanocomposites, 40 ppm was chosen as the optimum concentration.}, keywords = {sandstone,Nanocomposites,Interfacial tension,Xanthan,silica}, title_fa = {بررسی پارامترهای سنگ و سیال در انتخاب مناسب‌ترین غلظت نانو کامپوزیت در مخازن ماسه سنگی}, abstract_fa = {این مطالعه اثر یک نانو کامپوزیت جدید (ZnO/SiO2/Xanthan) را برای انتخاب مناسب­ترین غلظت متناسب با محیط متخلخل ماسه سنگی مورد مطالعه قرار می­دهد. این مطالعه برای اولین بار در شرایط مخزنی و مخازن ماسه سنگی صورت گرفته است. ابتدا مورفولوژی نانوکامپوزیت­ها با استفاده از آزمایش­های  XRDو SEM  مورد بررسی قرار گرفت. سپس اثر نانو کامپوزیت بر تغییرات ترشوندگی، کشش سطحی، ویسکوزیته، پتانسیل زتا،pH  و چگالی در غلظت­های مختلف نانوکامپوزیت در شرایط مخزن مورد بررسی قرار گرفت. بر اساس اطلاعات ترشوندگی و زتا پتانسیل در این مطالعه، بهترین غلظت برای آزمایش­های دینامیک سیال انتخاب شد. انتخاب بهترین غلظت سیال می­تواند بسیاری از مشکلات مثل کاهش بازیابی نفت در اثر مسدود کردن فضای خالی سنگ­ها را کاهش دهد. با توجه به کمترین زاویه تماس (°36.46) و بالاترین مقدار مطلق زتا پتانسیل (mV49.68-)، ppm 40 به‌عنوان بهترین غلظت برای انجام آزمایش­های دینامیک سیال انتخاب شد.}, keywords_fa = {ماسه سنگ,نانوکامپوزیت,کشش سطحی,زانتان,سیلیکا}, url = {https://www.farayandno.ir/article_702311.html}, eprint = {https://www.farayandno.ir/article_702311_a1f528fca83a355b31686bbf786ed5e0.pdf} }