per
شرکت ملی پالایش و پخش فرآورده های نفتی ایران
نشریه علمی فرآیند نو
1735-6466
2821-160X
2014-12-01
9
47
5
23
11371
Review
تخمین خواص ترمودینامیکی گازهای سبک فرآیندی در صنعت نفت و گاز با استفاده از یک معادله حالت جدید و کاربردی
Estimation of thermodynamic properties of Light process gases in oil and gas industry using a new and applicable equation of state
رسول محمدیخواه نجف آبادی
mohammadikhahr@ripi.ir
1
علی جبرئیلی جلودار
jebriliaj@yahoo.com
2
حامد نادری
naderiha@ripi.ir
3
مسئول پروژه
مهندس ارشد
مسئول پروژه
در این مطالعه معادلات حالت مختلف تجربی، تئوری و شبه تئوری برای سیالات انتخابی متفاوت مورد بررسی قرار گرفتهاند و صحت این معادلات جهت تخمین خواص ترمودینامیکی سیالات انتخابی در مقایسه با داده های تجربی مورد سنجش قرار گرفته است. همچنین یک معادله حالت جدید از معادله شبه تئوری محمدیخواه- ابوالقاسمی- محبی استخراج و معرفی شده است. نتایج این تحقیق نشان داده است که معادلات حالت مفروض دقت خوبی در پیش بینی انتالپی و انتروپی سیالات خالص در فشار های اتمسفری و بالاتر دارند بجز برای نرمال بوتان که مقدار خطا زیاد بوده است. همچنین نتایج این مطالعه توافق خوب داده های محاسباتی توسط این معادلات را جهت تخمین ضریب تراکم پذیری سیالات انتخابی با داده های تجربی نشان دادهاند. همچنین جهت محاسبه خواص ترمودینامیکی انتالپی و انتروپی در فشارهای کم معادله حالت سوآ - ردلیچ- کوانگ پیشنهاد شده است زیرا کمترین خطا را از خود نشان داده است.
In this study various empirical, theoritical and semi-theoritical equations of state for different optional fluids, have been investigated and the accuracy of these equations for thermodynamic properties estimation of these fluids in comparison with experimental data, was evaluated. Also a new equation of state has been derived from Mohammadikhah-Abolqasemi-Mohebbi semi-theoretical equation and has been introduced. The results of this research have showed that assumed equations of state have good accuracy in predicting the enthalpy and entropy for pure fluids in atmospheric pressures and slightly higher, except for n-butane which the error was high. Also, results of this research have showed good agreement between calculated data from these equations for compressibility factor prediction of optional fluids with experimental data. Also soave-redlich-kwong equation of state has been recommended for calculating thermodynamic properties including enthalpy and entropy at low pressures, because it has showed minimum errors.
https://www.farayandno.ir/article_11371_cd7149dd12c65378ec9f6be0617ee7a8.pdf
معادلات حالت
انتالپی
انتروپی
صنعت نفت و گاز
خواص ترمودینامیکی
Equations of state
Enthalpy
Entropy
Oil and gas industry
Thermodynamic properties
per
شرکت ملی پالایش و پخش فرآورده های نفتی ایران
نشریه علمی فرآیند نو
1735-6466
2821-160X
2014-12-01
9
47
24
36
11372
Review
بررسی کنترل دما در افزایش مقیاس راکتور واکنش جفت شدن اکسایشی متان
Some Aspects of Temperature Control in scale-up of Oxidative Coupling of Methane
نکیسا یعقوبی
n.yaghobi@ippi.ac.ir
1
پژوهشگاه پلیمر و پتروشیمی ایران
هدف این تحقیق بررسی راههای کنترل دمای راکتور نیمه صنعتی واکنش OCM می باشد. دراین راستا یک ایده جدید برای فرایندOCM پیشنهاد کرده ایم که در آن جریان (split flow mode) می شود و خوراک واکنش OCM شامل هوا و متان قبل از ورود به راکتور تا دمای واکنش گرم میشود. در این طرح راکتور باید تبادل حرارت با محیط در اثر کنوکسیون و تشعشع داشته باشد. روش عبور گاز از میان بستر ذرات جامد، برای گرم کردن خوراک تا دمای بهینه پیشنهادشده است. درراکتور واحد نیمه صنعتی گاز طبیعی در مجاورت هوا تبدیل به اتان و اتیلن می شود که در این راستاراکتور بستر ثابت کاتالیستی OCM از یک لوله با قطر اسمی یک اینچ و بطول یک متر و بیست سانتیمتر تشکیل خواهد شد. طراحی راکتور براساس حرارت آزاد شده 34-43 کیلو کالری به ازای هر مول متان در خوراک انجام شده است.
In this research some aspect of temperature control in pilot reactor was investigated. The split flow mode procedure was proposed, in which the temperature of feed gas, containing methane and oxygen, were reached to favorite reaction temperature before entrance to reactor. For the reason of highly exothermic of partial oxidative reaction, the important problem will be removal of heat flux from reactor body. In this research reactor was exposure in heat transfer with environment through radiation and convection. The passing of gas through the packed bed was used for reaching feed gas temperature to the optimum range. In this way OCM reactor was performed in isothermal operation and has high potential for heat removal. The reactor designed for diameter of 1 in and length of 125 cm.
https://www.farayandno.ir/article_11372_af0bfdee8c48b73b5e1a1f17f8cd5a23.pdf
جفت شدن اکسایشی متان
راکتور بستر ثابت
کاتالیست پروسکایت
افزایش مقیاس
OCM
Fixed bed reactor
Perovskite Catalyst
Scale Up
per
شرکت ملی پالایش و پخش فرآورده های نفتی ایران
نشریه علمی فرآیند نو
1735-6466
2821-160X
2014-12-01
9
47
37
50
11373
Review
مروری بر فرایند مایع سازی هیدروژن: چالشها و راهحلها
A Review on Hydrogen Liquefaction Process: Challenges and Solutions
علی صابری مقدم
articlemut@gmail.com
1
محمد مهدی بحری رشت آبادی
mmbahri@gmail.com
2
دانشیار دانشکده شیمی و مهندسی شیمی دانشگاه صنعتی مالک اشتر
دانشجوی دکترا، دانشکده شیمی و مهندسی شیمی، دانشگاه صنعتی مالک اشتر
فرایند مایعسازی هیدروژن به دلیل شرایط خاص عملیاتی و تجهیزات مورد استفاده بسیار سخت است. مشکلات موجود به سه بخش هزینه زیاد، بازده کم و عدم توسعهی روشهای جدید برای تولید هیدروژن مایع طبقهبندی میشوند. ماهیت خاص مولکول هیدروژن، شرایط ویژهی عملیاتی برای مایعسازی آن و استفاده از تجهیزات و موادی که در این شرایط ویژه از کارایی لازم برخوردار باشند، سبب ایجاد چالشهای فراوان در مسیر تولید هیدروژن مایع شده است. در این مقاله مروری بر چالشهای موجود بر سر راه تولید هیدروژن مایع ارائه می گردد و در هر مورد، به راه حلهای مناسب جهت رفع آن اشاره می گردد.
Hydrogen liquefaction process is a complex operation due to the special equipment and operational conditions used. The challenges involved are classified into three divisions as follow: high costs, low efficiency, and lack of the development of new approaches to produce liquid hydrogen. The peculiar nature of molecules of hydrogen, particular operational conditions of the hydrogen liquefaction process, and the use of appropriate equipment and materials operated under these conditions, cause many obstacles in the development of liquid hydrogen production. In the current study, a review on the challenges of the liquefaction of hydrogen is presented and appropriate solutions are suggested for each of them.
https://www.farayandno.ir/article_11373_a20044a369b2f6aff2fa90d4083d63d1.pdf
مایعسازی هیدروژن
هیدروژن مایع
تجهیزات مایعسازی
چالشها
راه حلها
Liquefaction of hydrogen
liquid hydrogen
liquefaction equipment
Challenges
solutions
per
شرکت ملی پالایش و پخش فرآورده های نفتی ایران
نشریه علمی فرآیند نو
1735-6466
2821-160X
2014-12-01
9
47
51
67
11374
Review
کاربرد مایعاتیونی به عنوان روانکارها و افزودنیهای سبز
Application of Ionic Liquids as the Lubricants and Green Additives
نجمه فرزین نژاد
farzinnejadn@ripi.ir
1
سید جمال حسنی راد
hassaniradsj@ripi.ir
2
مسئول پروژه-پژوهشگاه صنعت نفت
کارشناس-پژوهشگاه صنعت نفت
به دلیل افزایش تقاضای استفاده از روانکنندهها، نیاز به توسعه روانکنندههای جدید و بهبود افزودنیها به شدت احساس میشود. مایعاتیونی، نمکهای مذاب در دمای اتاق میباشند که اخیراً مزایای بسیار زیادی در این حوزه از خود نشان دادهاند. کاربرد مایعاتیونی به عنوان روانکنندهها در سیستمهای مختلف، موجب بهبود عملکرد آنها در کاهش سایش و اصطکاک نسبت به سایر روانکنندهها شده است. مایعاتیونی ترکیبی از یونهای نامتقارن بزرگ هستند که میتوانند بر روی سطح فلز جذب شده و با ساخت لایه فیلمی محافظ، شرایط روانکاری مرزی را تشکیل دهند. مقاله حاضر مایعاتیونی و سیالات روانساز را معرفی نموده و سپس به طور گسترده به ویژگیهای روانکنندگی مایعاتیونی و همچنین خواص افزودنی آنها به روغنهای پایه و سنتتیک میپردازد. در این مقاله ارتباط میان ساختار مایعاتیونی و عملکرد آنها در روانکاری بررسی میشود. در انتها نیز برخی مشکلات پیش روی این فناوری جدید و قابلیتهای حل آن بحث شده است.
Due to increased demands on lubricants, there is a need to develop new lubricants and improved additives. Ionic liquids (ILs) are room temperature molten salts that have recently shown many advantages in this area. The application of ILs as lubricants in a diverse range of systems has found that these materials can show remarkable protection against wear and reduction of friction. ILs consists of large asymmetrical ions that can readily adsorb onto a metal surface and produce a protective film under boundary lubrication conditions. This article starts with a brief introduction to ILs and fluid lubrication, and then discusses in more detail the tribological properties of IL lubricants, either as base and synthetic oil additives. In this article the correlation between the IL structure and their performance in tribology applications is examined. Finally, some current problems and potential solutions are discussed.
https://www.farayandno.ir/article_11374_4b7c61f84001cce8ab2565f1b63edec4.pdf
مایعاتیونی
افزودنی
روانکار
اصطکاک
لایه فیلمی محافظ
Ionic liquids
Additive
Lubricant
Friction
Protective film
per
شرکت ملی پالایش و پخش فرآورده های نفتی ایران
نشریه علمی فرآیند نو
1735-6466
2821-160X
2014-12-01
9
47
68
76
11375
Review
بهینه سازی دمای خروجی کوره ی ریفرمر واحد هیدروژن پالایشگاه نفت امام خمینی شازند در ظرفیت های عملیاتی متفاوت
Optimization of furnace reformer outlet temperature of hydrogen unit of Imam Khomeini Oil Refinery Company at various operating capacities
علیرضا دستجانی فراهانی
alireza-dastjanifarahani@yahoo.com
1
مریم ادیمی
maryam-adimi@yahoo.com
2
سید محسن حسینی
s-hosseini@araku.ac.ir
3
گروه مهندسی شیمی، دانشگاه آزاد اسلامی واحد فراهان، فراهان، ایران
عضو هیئت علمی، گروه مهندسی شیمی، دانشگاه آزاد اسلامی واحد فراهان، فراهان، ایران
عضو هیئت علمی- دانشگاه اراک
امروزه ریفرمینگ گاز طبیعی با بخار آب یکی از مهم ترین راه های تولید هیدروژن به شمار می رود. از آنجا که واکنش تولید هیدروژن یک واکنش گرما گیر می باشد نیاز به مصرف بالای انرژی کاملا محسوس است. در این کار تحقیقاتی اثر تغییرات دمای عملیاتی کوره ریفرمر پالایشگاه نفت امام خمینی شازند، در ظرفیت های عملیاتی متفاوت، بر راندمان تولید و میزان مصرف انرژی مورد مطالعه قرار می گیرد و راهکاری جهت رسیدن به دماهای بهینه خروجی کوره ریفرمر ارائه می گردد. نتایج نشان می دهد در یک ظرفیت عملیاتی مشخص، با کاهش دما به میزان 10 درجه سانتیگراد، میزان سوخت مصرفی تا NM3/h 200 کاهش می یابد و این در حالی است که جریان خروجی در محدوه استاندارد تعیین شده قرار دارد. همچنین مشاهدات نشان می دهد که نتایج از یک رابطه خطی پیروی می کند.
Nowadays, natural gas reforming by steam is and important technique for hydrogen production. According to the fact that reaction of hydrogen production is an endothermic reaction, high energy consumption is required. In this research, the effect of operating temperature of furnace reformer unit in various capacities on productive efficiency and energy consumption of this unit was studied. Also an appropriate procedure was recommended for optimization of furnace reformer temperature. The obtained results showed that in a special capacity by decreasing of furnace reformer temperature up to 10 oC the consumed fuel was declined up to 200 NM3/h whereas the outlet stream located in standard specifications. Also results exhibited linear trend for the optimization.
https://www.farayandno.ir/article_11375_22fcdf05f89691c1356fdfafbe02c7ca.pdf
ریفرمینگ گاز طبیعی
تولید هیدروژن
کاهش مصرف انرژی
دمای عملیاتی کوره ریفرمر بخار
بهینه سازی
Natural gas reforming
Hydrogen production
Energy consumption reduction
Operating temperature of furnace reformer
Optimization
per
شرکت ملی پالایش و پخش فرآورده های نفتی ایران
نشریه علمی فرآیند نو
1735-6466
2821-160X
2014-12-01
9
47
77
93
11376
Review
مروری بر مطالعات انجام شده در زمینه بازیابی فلز پلاتین از کاتالیست های مستعمل به روش تر (هیدرومتالورژی)
A Review of Studies Concerning the Platinum Recovery from Spent Catalysts by Wet (Hydrometallurgical) Method
زهرا سادات نقوی
naghavi_z@yahoo.com
1
سید محمد قریشی
ghoreshi@cc.iut.ac.ir
2
امیر رحیمی
rahimi@eng.ui.ac.ir
3
دانشگاه صنعتی اصفهان، دانشکده مهندسی شیمی
دانشگاه صنعتی اصفهان، دانشکده مهندسی شیمی
دانشگاه اصفهان-دانشکده فنی و مهندسی-گروه مهندسی شیمی
چکیده: هدف از انجام این مطالعه معرفی اجمالی و مقایسه ای روش های بازیابی فلز پلاتین از کاتالیست های مستعمل و مروری بر مطالعات انجام شده در زمینه بازیابی پلاتین از کاتالیست های مستعمل به روش تر (هیدرومتالورژی) می باشد. ابتدا روش تر و انواع آن به تفصیل توضیح داده شده است. سپس مطالعات آزمایشگاهی انجام شده که در آن ها پلاتین موجود در کاتالیست های مستعمل صنعتی و یا کاتالیست های مبدل خودرو به یکی از روش های تر بازیابی شده اند و همچنین مطالعات انجام شده در زمینه بررسی سینتیک فرایند استخراج پلاتین به روش جامد-مایع مرور شده است.
Abstract: The petroleum and petrochemical industries produce considerable amounts of spent catalysts. The platinum group metals (PGMs) exhibit excellent catalytic activity. Their excellent selective and activity make them very effective catalysts. Catalysts, after a certain period of active life and regeneration cycles, are deactivated. The aim of the present study is to introduce and compare the wet-base (hydrometallurgy) methods used for extraction of platinum from spent catalysts. First, the principles of wet method and its kinds are introduced. Then, the previous experimental studies in which the extraction of platinum from autocatalysts and spent catalysts of chemical industries has been studied, are reviewed and compared in terms of operating conditions, materials, economic and environmental aspects.
https://www.farayandno.ir/article_11376_b08383b5f50c888979b4d733e8ddb1f6.pdf
"پلاتین"
" کاتالیست مستعمل"
" روش تر (هیدرومتالورژی)"
" استخراج جامد-مایع"
"Platinum"
"Spent Catalyst"
"Hydrometallurgy Method"
"Solid-Liquid Extraction"