شبیه‌سازی عددی جریان سیال درون پمپ کولینگ و بررسی تأثیر رفتار هیدرو دینامیکی سیال بر سازه پمپ

نوع مقاله : ترویجی

نویسندگان

1 استادیار، دانشکده مهندسی مکانیک، دانشگاه آزاد اسلامی واحد چالوس

2 کارشناسی ارشد، دانشکده مهندسی مکانیک، دانشگاه آزاد اسلامی واحد چالوس

3 استادیار پژوهشگاه هوافضا، وزارت علوم تحقیقات و فناوری

چکیده

پمپ کولینگ نقش اساسی در یک پالایشگاه گاز ایفا می‌کند. در صورت از سرویس خارج شدن این پمپ (و آماده نبودن پمپ جایگزین) بلافاصله پالایشگاه از سرویس خارج می‌شود. لذا حساسیت این تجهیز ازلحاظ عملیاتی و فرآیندی بسیار حیاتی می‌باشد و تعمیر و نگهداری آن باید در کوتاه‌ترین زمان ممکن صورت پذیرد. با استفاده از تکنیک ارتعاش سنجی وضعیت سلامت این تجهیز مرتباً پایش می‌گردد. در یک بازه زمانی پس از بررسی وضعیت ارتعاشات تجهیز، بیس پلیت پمپ تصویض شد و همچنین جهت کاهش تنش‌های ناشی از پاپینگ، چیدمان پایپنگ ورودی به پمپ طراحی و اصلاح گردید. انجام اصلاحات مذکور، منجر به این شد که میزان ارتعاشات در شرایط جدید، از 8 میلی‌متر در ثانیه به 5 میلی‌متر کاهش یابد. همچنین جهت بررسی تأثیر رفتار سیال بر عملکرد پمپ، در یک پروژه جداگانه، به‌وسیله دینامیک سیالات محاسباتی (CFD)، جریان سیال درون پروانه و محفظه پوسته پمپ شبیه‌سازی گردید.

کلیدواژه‌ها

عنوان مقاله [English]

Numerical simulation of flow fluid in cooling pump and investigation of effect of flow behavior on pump structure

نویسندگان [English]

  • kouros Nekoufar 1
  • Gholamhasan Salek 2
  • seyed arash seyed shams taleghani 3
1 Department of Mechanical Engineering, Islamic Azad University, Chalous branch
2 Islamic Azad University, Electronic Branch
3 Assistant Professor, Aerospace Research Institute, Ministry of Science, Research, and Technology
چکیده [English]

In industrial plants such as gas refinery, sustainable production is a top priority. The cooling pump plays an essential role in a gas refinery. If the pump is out of service (and if the replacement pump is not ready), the refinery will be shut down immediately. Therefore, the sensitivity of this equipment is very critical in terms of operation and process and should be maintained in the shortest possible time. The status of this equipment is monitored regularly using the vibration technique. In a period of time, after the vibration analysis, a decision was made to modify the base plate of the pump as well as to reduce the stress; piping arrangement of the pump was redesigned and modified. These modifications resulted in a reduction in vibration rate from 8 mm / s to 5 mm under new conditions.

کلیدواژه‌ها [English]

  • Gas refinery
  • pump
  • Cooling tower

مراجع

  • بحرینیان سید سعید، بخشش مهدی، " یک روش برای به دست آوردن هندسه پیچیده ماشین‌های دوار "، نهمین کنفرانس مهندسی ساخت و تولید ایران، بیرجند – دانشگاه بیرجند
  • Usha, P.,Syamsundar, C.,2010. “Computational analysis on performance of a centrifugal pump impeller,” Proceedings of the 37th National & 4th International Conference on Fluid Mechanics and Fluid Power. Chennai, India, paper#TM-07.
  • Patel, K., Satanee, M., 2006. “New development of high head Francis turbine at jyoti ltd. for small hydro power plant,” Proceedings of Himalayan Small Hydropower Summit. Dehradun, India, paper#13.
  • Croba, D.,Kueny, J., 1996. Numerical Calculation of 2D Unsteady Flow in Centrifugal Pumps: Impeller and Volute Interaction.International Journal for Numerical Methods in Fluids22,p. 467.
  • Keck, H., Sick, M., 2008. Thirty years of numerical flow simulation in hydraulic turbomachines. ActaMech 201, p. 211.
  • Keck, H., Weiss, T., Michler, W., Sick, M., 2007. “Recent developments in the dynamic analysis of water turbines,”Proceedings of the 2nd IAHR International Meeting of the Workgroup on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems, Timisoara, Romania, pp. 9-20.
  • Pascoa, J., Mendes, A., Gato, L., 2009.A Fast Iterative Inverse Method for Turbomachinery Blade Design.Mechanics Research Communications36(5), 537.
  • http://www.cfdreview.com.
  • Kaupert, K., Holbein, P., Staubli, T., 1996. A First Analysis of Flow Field Hysteresis in a Pump Impeller.Journal ofFluids Engineering 118, p. 685.
  • Potts, I., Newton, T., 1998. "Use of commercial CFD pack-age to predict shut-off behavior of model centrifugal pump: an appraisal,"IMechE Seminar.
  • Sun, J., Tsukamoto, H. 2001. Off-Design Performance Prediction for Diffuser Pumps.Journal of Power and Energy, Proceedings of I. Mech. E A215, 191.
  • Dick, E.,Vierendeels, J.,Serbruyns, S.,Voorde, J., 2001. Performance Prediction of Centrifugal Pumps with CFD-Tools. Task Quarterly 5 (4), p. 579.
  • Takemura, T., Goto,A., 1996.Experimental and Numerical Study of Three-Dimensional Flows in a Mixed-Flow Pump JournalofTurbomachinery118 (3), p. 552.
  • Goto, A., 1997. Predictionof Diffuser Pump Performance Using 3D Viscous Stage Calculation.Journal of FluidsEngineering.
  • SedlarMandMensik P 1999 Investigation of rotor/stator interaction influence on flow fields in radial flow pumps Proceedings of 3rd European Conference on Turbomachinery, IMechE,pp.1017–1025
  • Hedi, L., Hatem, K.,Ridha, Z., 2010.“Numerical flow simulation in a centrifugal pump,” International Renewable Energy Congress. Sousse, Tunisia. 300-304.
  • Mentzos, M.,Filios, A.,Margaris, P.,Papanikas, D.,2004. “A numerical simulation of the impeller-volute interaction in a centrifugal pump,” Proceedings of International Conference from Scientific Computing to Computational Engineering. Athens, pp. 1-7.
  • Mentzos, M., Filios, A., Margaris, P., Papanikas, D., 2005. “CFD predictions of flow through a centrifugal pump impeller,” Proceedings of International Experiments/Process/System Modelling/ Simulation/Optimization. Athens, pp. 1-8.
  • Shah, S., Jain, S.,Lakhera, V., 2010. “CFD based flow analysis of centrifugal pump,” Proceedings ofInternational Conferenceon Fluid Mechanics and Fluid Power. Chennai, India, paper#TM08.
  • Bacharoudis, E.,Filios, A.,Mentzos, M.,Margaris, D., 2008.Parametric Study of a Centrifugal Pump Impeller by Varying the Outlet Blade Angle. The Open Mechanical Engineering Journal 2, p. 75.
  • Anagnostopoulos, J., 2006. CFD Analysis and Design Effects in a Radial Pump Impeller. WSEAS Transactions on Fluid Mechanics 1 (7), p. 763.
  • Patel K.,Ramakrishnan, N., “CFD analysis of mixed flow pump.”
  • Medvitz, R., Kunz, R., Boger, D., Adam, J.,Yocum, A., Pauley, L., 2002. Performance Analysis of Cavitating Flow in Centrifugal Pumps Using Multiphase CFD. Journal of Fluid Engineering 124, p. 377.
  • Nohmi, M.,Goto, A.,Iga, Y.,Ikohagi, T., 2003.“Cavitation CFD in a centrifugal pump,” Proceedings of International Symposium on Cavitation. Osaka, Japan, pp. 1-7.
  • Caridad, J., Asuaje, M.,Kenyery, F.,Tremante, A.,Aguillon, O., 2008. Characterization of a Centrifugal Pump Impeller under Two-Phase Flow Journal of Petroleum Science and Engineering 63,p. 18.
  • Gonzalez, J., Fernandez, J., Blanco, E., Santolaria C., 2002.Numerical Simulation of the Dynamic Effects Due to Impeller-Volute Interaction in a Centrifugal Pump.Journal of Fluids Engineering 124,p. 348.
  • Wang, H., Tsukamoto, H., 2001. Fundamental Analysis on Rotor-Stator Interaction in a Diffuser Pump by Vortex Method.Journal of Fluids Engineering 123, p. 737.
  • Salvadori, S., Gatta, S., Adami, P.,Bertolazzi, L., “Development of a CFD procedure for the axial thrust evaluation in multistage centrifugal pumps.”
  • Brennen,C; ‘’Hyrodynamic of Pump’’, California Institute of Technology,Pasadena,californio Originally published by Concept ETI, Inc and Oxford University Press,2006
  • Fraser,W.H., “ Flow Recirculation in Centrifugel Pump “ in Proceedings of the Tenth Turbomachinery Symposim,1981
  • Eckardt, D; “ Detailed flow investigations within a high-speed centrifugal compressor impeller ASME journal of Fluids Engineering,vol. 98, no.3, pp.390-402,1976
  • Howard, j. H. G., and Kittmer, c.w., Measured passage velocitied in a Radial Impeller with Shrouded and Unshrouded Configurations”, ASMEjournal of Engineering for power, Vol. 97,pp. 207-213,1975.
  • Thomas, R.N., ‘’Velocity Measurements in a Pump VOLUTE WITH A Non –rotating imperller “, Int.J.Heat and Fluid Flow, Vol. 7.pp.11-20,1986.
  • Goto,A.,”Study of internal flows in a mixed – flow pump impeller at various tip clearances using three – dimensional viscous flow compuations “ ASME Journal of Turbomachinery, Vol. 114, pp. 373-383, 1992
  • Nohmi,M. and Goto, A. “ Cavitation CFD in a centrifugal pump “ Fifth International Sysmposium on Cavitation, Japan, 2003

 

نشریه علمی فرآیند نو
دوره 16، شماره 75
آذر 1400
صفحه 84-110

فایل ها

اشتراک گذاری

ارجاع به این مقاله

آمار