[1] Adisorn Aroonwilas, Paitoon Tontiwachwuthikul, Amit Chakma, “Effects of operating and design parameters on CO2 absorption in columns with structured packings”, Separation and Purification Technology 24, 2001, pp. 403–411.
[2] Ludovic Raynal, Christophe Boyer, Jean-Pierre Ballaguet; “Liquid Holdup and Pressure Drop Determination in Structured Packing with CFD Simulations”, the Canadian Journal of Chemical Engineering, 82, 2004, pp. 871-879.
[3] Wang, G. Q.; Yuan, X. G.; Yu, K. T. (Review of Mass-Transfer Correlations for Packed Columns). Ind. Eng. Chem. Res. 44 (23), 2005, 8715.
[4] Nicolaiewsky, E. M. A.; Tavares, F. W.; Rajagopal, K.; Fair, J. R." Liquid Film Flow and Area Generation in Structured Packed Columns", Powder Technol.1999, 104 (1), 84.
[5] K. Onda, H. Takeuchi, Y. Okumoto, Mass transfer coefficients between gas and liquid phases in packed columns, J Chem. Eng. Jpn. 1, 1968, pp. 56–62.
[6] Rocha, J. A.; Bravo, J. L.; Fair, J. R. Distillation Columns Containing Structured Packings: A Comprehensive Model for Their Performance. 2. Mass-Transfer Model. Ind. Eng. Chem. Res., 1996, 35 (5), 1660.
[7] Reinhard Billet and Michael Schultes, “Predicting Mass Transfer in Packed Columns”, Chem. Eng. Technol. 16, 1993, pp. 1-9.
[8] Henriques de Brito, M.; von Stockar, U.; Bangerter, A. M.; Bomio, P.; Laso, M. Effective Mass-Transfer Area in a Pilot Plant Column Equipped with Structured Packings and with Ceramic Rings. Ind. Eng. Chem. Res., 33 (3), 1994, 647.
[9] Elisabetta Brunazzi, Giuiiano Nardini, Aiessandro Paglianti and Luigi Petarca, “Interfacial Area of Mellapak Packing: Absorption of 1, 1, I-Trichloroethane by Genosorb 300”, Chem. Eng. Technol. 18, 1995, pp.248-255.
[10] Gualito, J. J., Cerino, F. J., Cardenas, J. C., Rocha, J. A.; “Design Method for Distillation Columns Filled with Metallic, Ceramic, or Plastic Structured Packings”, Ind. Eng. Chem. Res. 36, 1997, 1747.
[11] Olujic, Z. “Development of a Complete Simulation Model for Predicting the Hydraulic and Separation Performance of Distillation Columns Equipped with Structured Packings”, Chem. Biochem. Eng. Q., 11 (1), 1997, 31.
[12] I. Siminiceanu, A. Friedl, M.A. Dragan, A Simple equation for the effective mass transfer area of the Mellapak750Y structured packing, in: Scientific Conference Meeting“ 35 Years of Petroleum-Gas University Activity”, Ploiesti,2002, November pp. 27–29.
[13] Z. Olujic, “Delft model a comprehensive design tool for corrugated sheet structured packings”, in: Proceedings of the Topical Conference Distillation Tools for the Practicing Engineer, AIChE Spring Meeting, New Orleans, LA, USA, March 10–14,2002, pp. 142–152.
[14] G.Q. Wang , X.G. Yuan , K.T. Yu; “A method for calculating effective interfacial area of structured packed distillation columns under elevated pressures”, Chemical Engineering and Processing 45, 2006, pp. 691–697.
[15] Robert E. Tsai, A. Frank Seibert, R. Bruce Eldridge and Gary T. Rochelle, “Influence of viscosity and Surface Tension on the Effective mass transfer area of structured packing”, Energy Procedia 1, 2009, pp. 1197-1204.
[16] C.W. Fitz, J.G. Kunesh, A. Shariat, “Performance of structured packing in a commercial-scale column at pressures of 0.02–27.6 bar”, Ind. Eng. Chem. Res. 38, 1999, pp. 512–518.
[17] Robert E. Tsai, Peter Schultheiss, Andreas Kettner, J. Christopher Lewis, A. Frank Seibert, R. Bruce Eldridge and Gary T. Rochelle,”Influence of Surface Tension on Effective Packing Area”, Ind. Eng. Chem. Res., 47,2008, pp. 1253-1260.
[18] L. Valenz, F. J. Rejl, J. Síma, and V. Linek, Absorption Mass-Transfer Characteristics of Mellapak Packings Series, Ind. Eng. Chem. Res. 2011, 50, pp.12134–12142.
[19] D. Flagiello, A.Parisi, A. Lancia, F. Di Natale, A Review on Gas-Liquid Mass Transfer Coefficients inPacked-Bed Columns, ChemEngineering 2021, 5, 43.