[1] C.S. Hsu, P.R. Robinson, "Lubricant processes and synthetic lubricants", Petroleum Science and Technology, vol. 13, pp. 253–285, 2019.
[2] J.J. Espada, R. Rodriguez, "Prediction of density and refractive index in furfural + lubricating oil systems", Fluid Phase Equilibria, vol. 438, pp. 29-36, 2017.
[3] S.M. Fakhr Hosseini, T. Tavakoli, M.S. Hatamipour, "Extraction of aromatic hydrocarbons from lube oil using n-hexane as a co-solvent", Separation and Purification Technology, vol. 66, pp. 167-170, 2009.
[4] V.R. Ferro, J. de Riva, D. Sanchez, E. Ruiz. J. Palomar, "Conceptual design of unit operations to separate aromatic hydrocarbons from naphtha using ionic liquids. COSMO-based process simulations with multicomponent “real” mixture feed", Chemical Engineering Research and Design, vol. 94, pp. 632–647, 2015.
[5] H. Izza, M. Korichi, "Extraction of aromatic from lube oil using a surfactant as an additive", Petroleum Science and Technology, vol. 35, pp. 201-205, 2017.
[6] P. Amani, J. Asadi. E. Mohammadi, S. Akhgar, M. Esmaili. "Cooperative influence of D2EHPA and TBP on the reactive extraction of cobalt from sulfuric acid leach solution in a horizontal semi-industrial column", Journal of Environmental Chemical Engineering, vol. 5, pp. 4716–4727, 2017.
[7] S.A. Idrees, L.L. Mustafa, S.S. Saleem, "Improvement viscosity index of lubricating engine oil using low molecular weight compounds", Science Journal of University of Zakho, vol. 7, pp. 14-17, 2019.
[8] M. Hamida, E.N. Ahmed, E. Ebaa, F. Amal, H. Ahmed. "Utilization of binary mixtures of different solvents for aromatics extraction from a petroleum wax distillate feedstock". Egyptian Journal of Chemistry, vol. 62, pp. 1749– 1759, 2019.
[9] B. Coto, R. van Grieken, J.L. Pena, J.J. Espada, "A generalized model to predict the liquid-liquid equilibrium in the systems furfural + Lubricating oils", Chemical Engineering Science, vol. 61, pp. 8028-8039, 2006.
[10] J.J. Espada, B. Coto, J.L. Pena, "Liquid-liquid equilibrium in the systems furfural + light lubricating oils using UNIFAC", Fluid Phase Equilibria, vol. 259, pp. 201-209, 2007.
[11] U.K.A. Kumar, R. Mohan. "Liquid-liquid equilibria measurement of systems involving alkanes (heptane and dodecane), aromatics (benzene or toluene), and furfural", Journal of Chemical & Engineering Data, vol. 56, pp. 485–490, 2011.
[12] H. Habaki, Y. Yoshimura, R. Egashira, R, "Separation of aromatic components from light cycle oil by solvent extraction", Separation Science and Technology, vol. 54, pp. 1159–1166, 2019.
[13] G.W. Meindersma, A.B. de Haan, "Conceptual process design for aromatic/aliphatic separation with ionic liquids", Chemical Engineering Research and Design, vol. 86, pp. 745–752, 2008.
[14] P. Navarro, M. Larriba, N. Delgado-Mellado, P. Sánchez-Migallón, J. García, F. Rodríguez. "Extraction and recovery process to selectively separate aromatics from naphtha feed to ethylene crackers using 1-ethyl-3methylimidazolium thiocyanate ionic liquid". Chemical Engineering Research and Design, vol. 120, pp. 102–112, 2017.
[15] M. Kalem, F. Buchbender, A. Pfennig, "Simulation of hydrodynamics in RDC extraction columns using the simulation tool “ReDrop”", Chemical Engineering Research and Design, vol. 89, pp. 1–9, 2011.
[16] A.H. Mehrkesh, T. Tavakoli, M.S. Hatamipour, A. Karunanithi, "Modeling and simulation of a rotating-disk contactor for the extraction of aromatic hydrocarbons from a lube-oil cut", Industrial & Engineering Chemistry Research, vol. 52, pp. 9422-9432, 2013.
[17] A. Montahaie, M.S. Hatamipour, T. Tavakkoli, S.F. Aghamiri, "Liquid-liquid equilibrium of (lube-oil cut + furfural) in several solvent/feed ratios and at different temperatures", Journal of Chemical & Engineering Data, vol. 54, pp. 1871–1875, 2009.
[18] B. Coto, R. van Grieken, J.L. Pena, J.J. Espada, "A model to predict physical properties for light lubricating oils and its application to the extraction process by furfural", Chemical Engineering Science, vol. 61, pp. 4381-4392, 2006.
[19] R. van Grieken, B. Coto, J.L. Pena, J.J. Espada, "Application of a generalized model to the estimation of physical properties and description of the aromatic extraction from a highly paraffinic lubricating oil". Chemical Engineering Science, vol. 63, pp. 711-720, 2008.
[20] F.M. Vargas, W.G. Chapman, "Application of the One-Third rule in hydrocarbon and crude oil systems", Fluid Phase Equilibria, vol. 290, pp. 103–108, 2010.
[21] J.J. Espada., B.Coto, R. van Grieken, J.M. Moreno, "Simulation of pilot-plant extraction experiments to reduce the aromatic content from lubricating oils", Chemical Engineering and Processing: Process Intensification, vol. 47, pp. 1398-1403, 2008.
[22] M.C. Sánchez-Lemus, J.C. Okafor, D.P. Ortiz, F.F. Schoeggl, S.D. Taylor, F.G.A. Van Den Berg, H.W. Yarranton, "Improved density prediction for mixtures of native and refined heavy oil with solvents", Energy and Fuels, vol. 29, pp. 3052–3063, 2015.
[23] R. van Grieken, B. Coto, E. Romero, J.J. Espada, "Prediction of liquid−liquid equilibrium in the system furfural + heavy neutral distillate lubricating oil", Industrial & Engineering Chemistry Research, vol. 44, pp. 8106-8112, 2005.
[24] S.M. Fakhr Hoseini, M.S. Hatamipour, T. Tavakoli, A. Montahaee, "Experimental liquid−liquid equilibrium of (lube cut + furfural + 2,2,4-tri-methyl pentane) ternary system from T = 323.15−343.15 K and simulation with NRTL", Industrial & Engineering Chemistry Research, vol. 48, pp. 9325-9330, 2009.
[25] S.M. Fakhr Hosseini, T. Tavakoli, M.S. Hatamipour, "Extraction of aromatic hydrocarbons from lube oil using n-hexane as a co-solvent", Separation and Purification Technology, vol. 66, pp. 167-170, 2009.
[26] A.H. Mehrkesh, S. Hajimirzaee, M.S. Hatamipour, T. Tavakoli, "Artificial neural network for modeling the extraction of aromatic hydrocarbons from lube oil cuts", Chemical Engineering & Technology, vol. 34, pp. 459-464, 2011.
[27] S.M. Fakhr Hosseini, T. Tavakoli, M.S. Hatamipour, A.H. Mehrkesh, "Mathematical modeling of RDC column in extraction of base oil and computing of the energy saving", Journal of Chemical Technology & Biotechnology, vol. 88, pp. 1289-1294, 2013.
[28] M.T. Fouladvand, J. Asadi, M.N. Lotfollahi, "Simulation and optimization of aromatic extraction from lube oil cuts by liquid-liquid extraction", Chemical Engineering Research and Design, vol. 165, pp. 118-128, 2021.
[29] "Annual book of ASTM standards", American Society for Testing and Materials. West Conshohocken. PA: ASTM International, 2014.
[30] J.M. Prausnitz, R.N. Lichtenthaler, E.G. de Azevedo, "Molecular thermodynamics of fluid-phase equilibria", New Jersey: Prentice-Hall, 2000.