[1] آشنایی با فلر، مدیریت بهداشت و ایمنی محیط زیست شرکت ملی پالایش و پخش، 1391.
[2] D. K. Stone, S. K. Lynch, R. F. Pandullo, L. B. Evans, W. M. Vatavuk, Flares. Part i: Flaring technologies for controlling voc-containing waste streams, J. Air Waste Manag. Assoc., vol. 42, no. 3, pp. 333–340, 1992.
[3] D. K. Stone, S. K. Lynch, R. F. Pandullo, R. Corporation, FLARES, 1995.
[4] A. Bahadori, "Blow-Down and Flare Systems", Natural Gas Processing, Elsevier, pp. 275–312, 2014.
[7] A. Kumar, S. Phadatare, P. Deore, "A guide on smokeless flaring: air/system assisted and high pressure flaring", International Journal of Engineering Applied Sciences and Technology, Vol. 4, Issue 12, 2020.
[8] R. F. Huang, J. M. Chang, "The stability and visualized flame and flow structures of a combusting jet in cross flow", Combust. Flame, vol. 98, no. 3, pp. 267–278, Aug 1994.
[9] E. Bourguignon, M. R. Johnson, L. W. Kostiuk, "The use of a closed-loop wind tunnel for measuring the combustion efficiency of flames in a cross flow", Combust. Flame, vol. 119, no. 3, pp. 319–334, Nov 1999.
[10] M. R. Johnson, D. J. Wilson, L. W. Kostiuk, "A fuel stripping mechanism forwake-stabilized jet diffusion flames in crossflow", Combust. Sci. Technol., vol. 169, no. 1, pp. 155–174, Aug 2001.
[11] L. Kostiuk, M. Johnson, G. Thomas, "University of Alberta Flare Research Project Final Report", November 1996–September 2004”, 2004.
[12] D. Castiñeira and T. F. Edgar, "CFD for Simulation of Steam-Assisted and Air-Assisted Flare Combustion Systems", Energy & Fuels, vol. 20, no. 3, pp. 1044–1056, May 2006.
[13] D. Castiñeira and T. F. Edgar, "Computational Fluid Dynamics for Simulation of Wind-Tunnel Experiments on Flare Combustion Systems", Energy & Fuels, vol. 22, no. 3, pp. 1698–1706, May 2008.
[14] D. Castiñeira, T. F. Edgar, "CFD for Simulation of Crosswind on the Efficiency of High Momentum Jet Turbulent Combustion Flames", J. Environ. Eng., vol. 134, no. 7, pp. 561–571, 2008.
[15] M. S. Lawal, M. Fairweather, D. B. Ingham, L. Ma, M. Pourkashanian, A. Williams, "Computational Study of a Lifted Turbulent Jet Flame in a Cross-flow: Flame Length and Emissions", Proc. 2nd Annu. Gas Process. Symp., pp. 237–245, 2010.
[16] A. S. Langman , G. J. Nathan, "Influence of a combustion-driven oscillation on global mixing in the flame from a refinery flare", Exp. Therm. Fluid Sci., vol. 35, no. 1, pp. 199–210, Jan 2011.
[17] K. D. Singh et al., "Computational fluid dynamics modeling of industrial flares operated in stand-by mode", Ind. Eng. Chem. Res., vol. 51, no. 39, pp. 12611–12620, 2012.
[18] K. D. Singh, P. Gangadharan, D. H. Chen, H. H. Lou, X. Li, and P. Richmond, "Computational fluid dynamics modeling of laboratory flames and an industrial flare", J. Air Waste Manag. Assoc., vol. 64, no. 11, pp. 1328–1340, 2014.
[19] س. جوادی، م. عنبرسوز، ع. قبادی، م. کهرم، "بررسی عددی اثر باد بر شکل شعله در مشعل بلند پالایشگاه سرخون و قشم"، نشریة علوم کاربردی و محاسباتی در مکانیک، جلد 28، شماره دو، 1393.
[20] ر. صباغ، ن. رهبر، "بررسی تاثیر شکل هندسی بر بیشینه دمای جداره ی نوک فلر و توزیع آلایندههای خروجی آن"، مجله مدل سازی در مهندسی، جلد 4، شماره 4، 1394.
[21] M. Javadi et al., "Numerical Investigation of Wind Effects on the Flame Shape of Sarkhoon and Qeshm’s Refinery Flares", vol. 28, no. 2, 2017.
[22] F. S. Marra, G. Continillo, "Dynamic Numerical Simulation of an Enclosed Flare", in Combustion Colloquia, XXXII Event of The Italian Section of The Combustion, pp. 1–6., 2009.