[1] F. Dawood, M. Anda, G. Shafiullah, "Hydrogen production for energy: An overview", International Journal of Hydrogen Energy, 45(7), pp. 3847-3869, 2020.
[2] I., Dincer, "Green methods for hydrogen production", International journal of hydrogen energy, 37(2), pp. 1954-1971, 2012.
[3] B. a Lee, H. Lim, "Cost‐competitive methane steam reforming in a membrane reactor for H2 production: Technical and economic evaluation with a window of a H2 selectivity" International Journal of Energy Research, 43(4), pp. 1468-1478, 2019.
[4] P., Nikolaidis, A. Poullikkas, "A comparative overview of hydrogen production processes", Renewable and sustainable energy reviews, vol. 67, pp. 597-611, 2017.
[5] B. Anzelmo, J. Wilcox,S. Liguori, "Hydrogen production via natural gas steam reforming in a Pd-Au membrane reactor. Comparison between methane and natural gas steam reforming reactions", Journal of Membrane Science, vol. 568, pp. 113-120, 2018.
[6] A. Iulianelli, et al., "Advances on methane steam reforming to produce hydrogen through membrane reactors technology: A review", Catalysis Reviews, 58(1), pp. 1-35, 2016.
[7] L.Kaiwen, Y. Bin, Z. Tao, "Economic analysis of hydrogen production from steam reforming process: A literature review", Energy Sources, Part B: Economics, Planning, and Policy, 13(2), pp. 109-115, 2018.
[8] R. Kothari, D. Buddhi, R. Sawhney, "Comparison of environmental and economic aspects of various hydrogen production methods", Renewable and Sustainable Energy Reviews, 12(2), pp. 553-563, 2008.
[9] K. Ghasemzadeh, E. Andalib, A. Basile, "Modelling study of palladium membrane reactor performance during methan steam reforming using CFD method", Chemical Product and Process Modeling, 11(1), pp. 17-21, 2016.
[10] S. Kumar, J.K. Prajapati, "Hydrogen production by partial oxidation of methane: modeling and simulation", International Journal of Hydrogen Energy, 34(16), pp. 6655-6668, 2009.
[11] M. Halabi, et al., "Modeling and analysis of autothermal reforming of methane to hydrogen in a fixed bed reformer", Chemical Engineering Journal, 137(3), pp. 568-578, 2008.
[12] V. Palma, et al., Membrane reactors for H2 and energy production, in Current Trends and Future Developments on (Bio-) Membranes., Elsevier, p. 33-56, 2020.
[13] J.A. Ritter, A.D. Ebner, "State‐of‐the‐art adsorption and membrane separation processes for hydrogen production in the chemical and petrochemical industries", Separation Science and Technology, 42(6), pp. 1123-1193, 2007.
[14] L. Meng , T. Tsuru, "Microporous membrane reactors for hydrogen production", Current Opinion in Chemical Engineering, vol. 8, pp. 83-88, 2015.
[15] T.Y. Amiri, , K. Ghasemzageh, A. Iulianelli, "Membrane reactors for sustainable hydrogen production through steam reforming of hydrocarbons: A review", Chemical Engineering and Processing-Process Intensification, vol.157, pp. 108148, 2020.
[16] A. Arratibel, et al., "Development of Pd-based double-skinned membranes for hydrogen production in fluidized bed membrane reactors", Journal of Membrane Science, vol. 550 ,pp. 536-544, 2018.
[17] F. Gallucci, et al., "Recent advances on membranes and membrane reactors for hydrogen production", Chemical Engineering Science, vol. 92, pp. 40-66, 2013.
[18] P. Gunjal and V. Ranade, Catalytic reaction engineering, in Industrial Catalytic Processes for Fine and Specialty Chemicals. Elsevier, 2016, pp. 263-314.
[19] Werther, J., Fluidized‐bed reactors. Ullmann's encyclopedia of industrial chemistry, 2000.
[20] A. Soomro, S.R. Samo, and A. Hussain, Fluidization in cold flow circulating fluidized bed system, in Energy, Environment and Sustainable Development, Springer, 2012, pp. 161-173.
[21] S. Deshmukh, et al., "Membrane assisted fluidized bed reactors: potentials and hurdles", Chemical Engineering Science, 62(1-2), pp. 416-436, 2007.
[22] Marra, L., et al., "Development of a RhZrO2 catalyst for low temperature autothermal reforming of methane in membrane reactors", Catalysis Today, vol. 236, pp. 23-33, 2014.
[23] J. Grace, S.S. Elnashaie, C.J. Lim, "Hydrogen production in fluidized beds with in-situ membranes", International Journal of Chemical Reactor Engineering, 3(1), 2005.
[24] L. Roses, et al., "Comparison between fixed bed and fluidized bed membrane reactor configurations for PEM based micro-cogeneration systems", Chemical engineering journal, 171(3), pp. 1415-1427, 2011.
[25] A. Helmi, et al., "On concentration polarization in fluidized bed membrane reactors", Chemical Engineering Journal, vol. 332, pp. 464-478, 2018.
[26] F. Gallucci, M. Van Sintannaland, J. Kuipers, "Theoretical comparison of packed bed and fluidized bed membrane reactors for methane reforming", International journal of hydrogen energy, 35(13), pp. 7142-7150, 2010.
[27] L. Roses, et al., "Experimental study of steam methane reforming in a Pd-based fluidized bed membrane reactor", Chemical engineering journal, vol.222, pp. 307-320, 2013.
[28] G. Ye, et al., "Modeling of fluidized bed membrane reactors for hydrogen production from steam methane reforming with Aspen Plus", International journal of hydrogen energy, 34(11), pp. 4755-4762, 2009.
[29] A. Mahecha-Botero, et al., "Pure hydrogen generation in a fluidized-bed membrane reactor: experimental findings", Chemical Engineering Science, 63(10), pp. 2752-2762, 2008.
[30] D. Xie, et al., "Reaction/separation coupled equilibrium modeling of steam methane reforming in fluidized bed membrane reactors", International journal of hydrogen energy, 35(21), pp. 11798-11809, 2010.
[31] A.M. Dehkordi, M. Memari, "Compartment model for steam reforming of methane in a membrane-assisted bubbling fluidized-bed reactor", International Journal of hydrogen energy, 34(3), pp. 1275-1291, 2009.
[32] M. Abashar, K. Alhumaizi, A. Adris, "Investigation of methane–steam reforming in fluidized bed membrane reactors", Chemical Engineering Research and Design, 81(2), pp. 251-258, 2003.
[33] A. Mahecha-Botero, et al., "Comparison of fluidized bed flow regimes for steam methane reforming in membrane reactors: A simulation study", Chemical Engineering Science, 64(16), pp. 3598-3613, 2009.
[34] J.A. Medrano, et al., "Pd-based metallic supported membranes: High-temperature stability and fluidized bed reactor testing", international journal of hydrogen energy, 41(20), pp. 8706-8718, 2016.
[35] C.S. Patil, M. van Sint Annaland, J. Kuipers, "Fluidised bed membrane reactor for ultrapure hydrogen production via methane steam reforming: Experimental demonstration and model validation", Chemical Engineering Science, 62(11), pp. 2989-3007, 2007.
[36] A. Adris, S. Elnashaie, R. Hughes, "A fluidized bed membrane reactor for the steam reforming of methane" The Canadian Journal of Chemical Engineering, 69(5), pp. 1061-1070, 1991.
[37] A. Adris, C. Lim, J. Grace, "The fluidized-bed membrane reactor for steam methane reforming: model verification and parametric study", Chemical Engineering Science, 52(10), pp. 1609-1622.
[38] A.-E.M. Adris, J.R. Grace, "Characteristics of fluidized-bed membrane reactors: scale-up and practical issues", Industrial & engineering chemistry research, 36(11), pp. 4549-4556, 1997.
[39] K. Chen, et al., "The intrinsic kinetics of methane steam reforming over a nickel-based catalyst in a micro fluidized bed reaction system", International Journal of Hydrogen Energy, 45(3), pp. 1615-1628, 2020.
[40] Y. Chen, , et al., "Hydrogen production in a sorption-enhanced fluidized-bed membrane reactor: operating parameter investigation", Industrial & Engineering Chemistry Research, 53(14), pp. 6230-6242, 2014.
[41] N. Lu, et al., "Modeling of autothermal reforming of methane in a fluidized bed reactor with perovskite membranes", Chemical Engineering and Processing-Process Intensification, vol.124, pp. 308-318, 2018.
[42] C.S. Patil, M. van Sint Annaland, J.A. Kuipers, "Design of a novel autothermal membrane-assisted fluidized-bed reactor for the production of ultrapure hydrogen from methane", Industrial & engineering chemistry research, 44(25), pp. 9502-9512, 2005.
[43] F. Gallucci, M. van Sint Annaland, J. Kuipers, "Autothermal reforming of methane with integrated CO 2 capture in a novel fluidized bed membrane reactor. Part 1: experimental demonstration", Topics in catalysis, vol.51, pp. 133-145, 2008.
[44] A. Mahecha-Botero, et al., "Pure hydrogen generation in a fluidized bed membrane reactor: application of the generalized comprehensive reactor model", Chemical engineering science, 64(17), pp. 3826-3846, 2009.
[45] Z. Chen, et al., "Experimental studies of pure hydrogen production in a commercialized fluidized-bed membrane reactor with SMR and ATR catalysts", International Journal of Hydrogen Energy, 32(13), pp. 2359-2366, 2007.
[46] S.T. Oyama, et al., "Dry reforming of methane has no future for hydrogen production: Comparison with steam reforming at high pressure in standard and membrane reactors", International journal of hydrogen energy, 37(13), pp. 10444-10450, 2012.
[47] M. Abashar, "Coupling of steam and dry reforming of methane in catalytic fluidized bed membrane reactors", International Journal of Hydrogen Energy, 29(8), pp. 799-808, 2004.
[48] P. Durán, et al., "Pure hydrogen from biogas: Intensified methane dry reforming in a two-zone fluidized bed reactor using permselective membranes", Chemical Engineering Journal, vol. 370, pp. 772-781, 2019.
[49] P. Shahkarami, S. Fatemi, "Mathematical modeling and optimization of combined steam and dry reforming of methane process in catalytic fluidized bed membrane reactor", Chemical Engineering Communications, 202(6), pp. 774-786, 2015.